Tech Tip: Pontiac Vibe CAF Replacement Procedure

Tech Tip: Pontiac Vibe CAF Replacement Procedure

Should you get a 2003-'06 Pontiac Vibe in your shop that is in need of a Cabin Air Filter (CAF) replacement, adhere to the following steps to provide this service. The CAF on this vehicle is located behind the glove box door inside the filter housing ....

Should you get a 2003-’06 Pontiac Vibe in your shop that is in need of a Cabin Air Filter (CAF) replacement, adhere to the following steps to provide this service.

The CAF on this vehicle is located behind the glove box door inside the filter housing.

1. Open the glove box door.
2. Remove the Philips-type screw located at the right side of the glove box door and slide off the connecting rod (See Figure 1)

3. Push in on each side of the glove box door to release the tabs. Swing the glove box door down (See Figure 2).

4. Lower the filter housing door and remove the CAF by pulling toward you (See Figure 3).

5. Installation is in the reverse order of removal.

Courtesty of ATP-Inc.

For additional information on products offered by ATP-Inc., visit www.atp-inc.com.

You May Also Like

Autoshop Solutions Partners With Turnkey Marketing

Both companies only focus on the automotive aftermarket and have the same goal of keeping those bays full.

Autoshop Solutions has partnered with Turnkey Marketing to offer a comprehensive marketing solution for all shops. With this partnership, Autoshop Solutions and Turnkey Marketing can now provide an even more powerful marketing program for their customers. Both companies only focus on the automotive aftermarket and have the same goal of keeping those bays full! "Turnkey Marketing and Autoshop Solutions have partnered together to help auto repair shops have a complete marketing strategy and excellent implementation," said Carrie-Lynn Rodenberg, founder of Turnkey Marketing. “We partnered with Autoshop Solutions because they are a leader in automotive aftermarket digital marketing and truly want what’s best for their clients.”"We are very excited to work with Carrie-Lynn and her entire team at Turnkey Marketing," stated Margaret Palango, CEO, Autoshop Solutions. "With the combined efforts of their marketing guidance and our digital services we can now offer a robust and comprehensive marketing package.”

NRS Brakes Launches Brake Pads For Ford F-150 Lightning

The brake kits cover both front and rear applications for almost 1.6 million vehicles covered.

AP Emissions Releases January New Part Number Update

The release includes direct fit EPA converters covering more than 6.6 million vehicles in operation.

Stainless Steel Did Not Kill The Exhaust Repair

Direct fit parts can be used to make an effective repair quickly.

Replacing Master Cylinders

The most common problems that occur in the master cylinder are wear in the piston bore and piston seal failure.

Other Posts

10 Tips For Servicing Hydroboost Brake Units

Hydroboost brake systems are self-bleeding if there is no other problem in the system.

Manual Transmission Failure Causes

One of the most common reasons behind why a manual transmission fails is lack of lubrication.

Wheel Bearing Hub Damage Repair

Noise is a classic sign of a bad wheel bearing or wheel hub bearing. Determining why the damage happened may take some time.

Electric Vehicle Battery Service

Don’t be afraid to work on battery packs. However, you should be mindful of the potential damage high voltages can cause.