Tech Tip: Chrysler Van's Accessory Drive Belt Squeals

Tech Tip: Chrysler Van’s Accessory Drive Belt Squeals

If a customer's 2001 Caravan, Town & Country or Voyager has an accessory drive belt that squeals or jumps off the pulleys, check for water that may be leaking from the wiper module drain tube connector and dripping onto the accessory drive belt. In colder climates, ice can form on the accessory drive belt and may cause the belt to jump off the pulleys when the vehicle is started. Locate the wiper module drain tube near the top of the right strut tower. With the hood open, direct water into the ....

If a customer’s 2001 Caravan, Town & Country or Voyager has an accessory drive belt that squeals or jumps off the pulleys, check for water that may be leaking from the wiper module drain tube connector and dripping onto the accessory drive belt.

In colder climates, ice can form on the accessory drive belt and may cause the belt to jump off the pulleys when the vehicle is started.

Locate the wiper module drain tube near the top of the right strut tower. With the hood open, direct water into the cowl grille. If water leaks at the wiper module drain tube connector, perform the Repair Procedure.

Repair Procedure

  1. Remove the drain tube connector from the wiper module and clean the mating surface.
  2. Install the foam seal (P/N 05080824AA) onto the drain tube connector making sure it is fully seated into the recess of the connector. See Figure 1.
  3. Install the drain tube connector to the wiper module making sure it is seated correctly.
  4. If the accessory drive belt has jumped off the pulleys, inspect the belt for damage and replace if necessary. Follow the procedures in the 2001 RS service manual for accessory drive belt installation.

Courtesy of Identifix.

For more information, visit www.identifix.com.

You May Also Like

Gen 1 Wheel Bearings

Removing and installing these bearings requires the correct tools and patience.

The most challenging wheel bearing to replace is a cartridge or press-fit, otherwise known as a gen 1 wheel bearing. No matter what you call them, gen 1 wheel bearings can be found on domestic and import nameplate vehicles. Removing and installing these bearings requires the correct tools and patience. 

Lexus and Toyota Camera Calibration (VIDEO)

Joe Keene discusses how to calibrate the camera on a 2021 Lexus UX where the camera was removed and reinstalled.

TechShop Reveal: Streamlight Stinger Color-Rite Flashlight

TechShop Reveal provides a 360 product video highlighting the industry’s latest innovations.

Utilizing NVH Tools

Technology has been improving on NVH tools over the years.

AAPEX 2022: Get to Know Performance Ride Technology

PRT displayed a new product line and its extensive portfolio of heavy-duty applications at AAPEX 2022.

Other Posts

The Striking Point Podcast: Getting Prepared for EVs

In an all-new video podcast series, John Forro of Autel sits down with the TechShop team to discuss all things EV.

Autel Energy Releases its Newest EV Charger

The AC Ultra features an 8-inch LCD touchscreen, a pedestal and a charging cable management system.

Struts and Memory Steer

We can summarize the cause of memory steer in one word: binding.

Limited-Slip Differentials And Diagnostics

A limited-slip differential helps to control the tangential forces.