Tech Tip: Audi 2.8L V6 Rear Crankshaft Seal Leaks After Replacement

Tech Tip: Audi 2.8L V6 Rear Crankshaft Seal Leaks After Replacement

Oil may leak from the rear crankshaft seal after seal replacement due to the seal lip rolling while installing the new seal. This condition affects 1996 A4 with 2.8L V6 (Engine Code AFC). When replacing the seal, the new seal is supplied pre-installed in the flange.

This condition affects 1996 A4 with 2.8L V6 (Engine Code AFC). When replacing the seal, the new seal is supplied pre-installed in the flange. 



Seal/Flange P/N: 078 103 171H 



Flange gasket P/N: 078 103 181 (must be ordered separately).



Caution: Part numbers are for reference only.



1. Carefully remove installation tool that comes with seal and apply a small amount of engine oil to the inner lip of the seal.



Note: Lubricating the seal lip will ease seal installation and reduce the tendency of the seal to roll as it is being installed.



2. Carefully reinstall the seal installation tool.



3. Install oil seal and flange with new gasket.



4. Torque reusable flange bolts to 7 ft.lbs. (10Nm).

Some or all of this information was provided by the Automotive Parts Remanufacturers Association (APRA). For more information on technical bulletins available through APRA call 703-968-2772 or visit www.AutoBulletins.com.

You May Also Like

SMP Introduces 276 New Part Numbers

Included in the release is new coverage for 77 product categories.

Standard Motor Products (SMP) has introduced 276 new part numbers since the start of the year. Included in the release is new coverage for 77 product categories, and 43 part numbers for 2022 and 2023 model-year vehicles.

Evident in this release is SMP’s continued commitment to the hybrid and electric vehicle market through its Standard and Four Seasons brands. This release includes a universal Battery Pack Charging Cord for electric vehicles, as well as a multitude of parts for hybrid vehicles. Brake Pedal Travel Sensors are now offered for several hybrid models, including the 2017-11 Lexus CT200h and 2019-2014 Toyota Highlander. Park Assist Cameras are now available for the 2012-2010 Lexus HS250h, and a Power Sunroof Motor is now available for the 2020-2013 Nissan Pathfinder. A total of 88 new Sensors, Switches, Actuators, and Connectors have also been added, including Power Door Lock Actuators, Charge Air Coolers, and Vehicle Speed Sensors, expanding SMP’s powertrain-neutral coverage.

Mitchell 1 to Hold Shop Management Workshop in Orlando

Registration now open for two-day training event.

Myers Tire Supply Announces New TPMS Programming App

The new app provides rapid programming in one tap.

Dorman Launches New Repair Solutions

Among the new releases are Dorman OE FIX repair solutions designed to help save time, money or increase reliability.

Opus IVS Announces Launch of Free Training Series

Seminars and coursework focused on advanced vehicle technologies for those wishing to advance their skills.

Other Posts

Autoshop Solutions Partners With Turnkey Marketing

Both companies only focus on the automotive aftermarket and have the same goal of keeping those bays full.

NRS Brakes Launches Brake Pads For Ford F-150 Lightning

The brake kits cover both front and rear applications for almost 1.6 million vehicles covered.

AP Emissions Releases January New Part Number Update

The release includes direct fit EPA converters covering more than 6.6 million vehicles in operation.

GRI Receives US DOT Certification For Safety

GRI tires will now incorporate the DOT code emboss on its side walls.