Tech IQ: Why OE Cooling System Plastic Parts Fail

Tech IQ: Why OE Cooling System Plastic Parts Fail

It's critical that the fiber gasket can move. This video is sponsored by Auto Value and Bumper to Bumper.


Chances are, if you’re replacing one of these on a late model engine, you’re going to be dealing with one of these. It’s made of plastic. And the sealing technology behind it that keeps it sealed to the block or even the head, well, it requires a different type of sealing.

Back in the day, if you’re only dealing with an aluminum housing for a thermostat, well, you could get away with a fiber gasket and maybe goop some steel around it to make sure that it seals. But with these, the technology is different because you’re dealing with two different kinds of materials.

You’ve got the plastic sealing either to an iron block, aluminum head, or other materials. So it’s critical that that gasket can move. The technology you may be dealing with, well, it could be a carrier style gasket, or it could be an O-ring style gasket.

This goes in a groove on the housing. And it’s critical for the health of the component that the housing, it’s not damaged. There’s no nicks, grooves, cracks at all on the groove that holds the O-ring. And it’s also critical that you do not use any sealants to help cure the joint, to make sure that it stays in place. Because this actually has to move back and forth due to the expansion and contraction rates of the two different materials, plastic and maybe aluminum.

Also, look up the manufacturer’s recommendations. I guarantee you, they’re going to say, “Make sure all surfaces are extremely clean.” You may even want to clean this with brake cleaner. Also, there should be no oil or other sealants on the O-ring itself or in the groove of the gasket. If you must, you can dunk this in coolant, and then put it inside the housing. This way, it’s going to be able to move freely inside of the groove and seal the thermostat to the housing and to the block and last a very long time.

This video is sponsored by Auto Value and Bumper to Bumper.

You May Also Like

Limited Slip Supplement (VIDEO)

If the frictional properties are not correct, chatter will occur. Sponsored by Lubegard.

Welcome to the Lubegard Limited Slip Supplement overview. Clutch-based limited slip differentials are common on many automotive applications like trucks and SUVs, but they present a unique problem. These differentials often use different clutch configurations, either cone or flat type, made with various materials and frictional requirements. When both wheels have ample traction, the clutch plates bind together tightly, sending consistent power to each wheel. When one wheel slips, additional power is sent to the other wheel based on the frictional properties of the clutch packs. This is where the gear lubricants frictional properties play an important role in functionality and performance.

Rust and Corrosion Preventive Oil (VIDEO)

Your tools and equipment need to be protected from rust. This video is sponsored by Lubegard.

Auto Pros Team Visits Hybrid Shop of The Carolinas

Auto Pros on the Road puts the Babcox team into shops across the USA. This episode is sponsored by Autolite.

Nissan Around View ADAS Camera Calibration (VIDEO)

Always calibrate the around view monitor system after a collision.This video is sponsored by Hunter Engineering.

Collision Blueprinting with Alignment Equipment (VIDEO)

An alignment is usually called for prior to ADAS calibrations. This video is sponsored by Hunter Engineering.

Other Posts

ADAS Calibrations: Accessing the FCA/Stellantis Secure gateway

The secure gateway ensures no procedures are performed without the proper data. Sponsored by Hunter Engineering.

Ford F-250 Shock Replacement (VIDEO)

Follow along the step by step installation process of shocks on a Ford F-250. This video is sponsored by PRT.

2007-2021 Toyota Tundra Strut Replacement (VIDEO)

Follow along the step by step installation process for struts on 2007-2021 Toyota Tundra’s. This video is sponsored by PRT.

AMN Drivetime: MEMA Leaders Chat About The Future

MEMA leaders sat down with Bill Babcox to share a few updates on the realignment of the association announced in November.