Tech Feature: New Refrigerant Change May Not Be a 'SNAP'

Tech Feature: New Refrigerant Change May Not Be a ‘SNAP’

The introduction of HFO-1234yf in vehicle A/C systems in the U.S. could be a few years away. However, it is plausible that some (dealership technicians and collision repairers) may see HFO-1234yf systems by late 2011 and early 2012, as European models begin the R-134a phase-out and make their way across the pond. (R-134a is to be completely phased out of new European systems by 2017.)

By Ed Sunkin, Editor

Due to a European directive requiring its automakers to use a lower Global Warming Potential (GWP) refrigerant in their mobile air conditioning systems beginning in 2011, HFO-1234yf is expected to come out on top as the new refrigerant of choice in “The Old World.”

While this issue may not affect the U.S. independent aftermarket for a while, it is plausible that some (dealership technicians and collision repairers) may see HFO-1234yf systems by late 2011 and early 2012, as European models begin the R-134a phase-out and make their way across the pond. (R-134a is to be completely phased out of new European systems by 2017.)

According to industry associations and refrigerant manufacturers, many of the world’s major automobile manufacturers and a variety of government agencies have studied HFO-1234yf extensively and found it superior to other potential replacements for HFC-134a. HFO-1234yf is a non-Ozone Depleting Substance with a GWP of 4. In comparison, the current refrigerant used in vehicles for the last 15 years, R-134a, has a GWP of 1,430.

Making the Case for HFO-1234yf
The U.S. Environmental Protection Agency (EPA) said it has conducted its own evaluation of the product, and has proposed a rule under the federal Significant New Alternatives Policy (SNAP) that would approve HFO-1234yf for use in U.S. mobile air conditioning systems.

The Society of Automobile Engineers (SAE) also has had a hand in pushing the automotive industry toward this new refrigerant.

In November 2009, SAE International released its test results pertaining to the safety and environmental performance of R-1234yf being used as a worldwide, Low GWP Refrigerant for vehicles.

Based on the results, the sponsors of the SAE CRP1234 report have concluded that HFO-1234yf can be used as the global replacement refrigerant in future mobile air conditioning systems. From the evaluation and test results, it has been concluded that HFO-1234yf can be safely accommodated through established industry standards and practices for vehicle design, engineering, manufacturing and service.

This latest report is SAE’s third evaluating this refrigerant, and was part of a two-year long global research program created to determine the safety and environmental characteristics of HFO-1234yf. SAE’s investigation confirmed that HFO-1234yf is an environmentally friendly refrigerant suitable for use in direct expansion mobile air conditioning systems.

As part of this study, various automotive industry players conducted evaluations on a variety of vehicle applications. Additional testing and research was conducted at internationally recognized laboratories to verify worldwide acceptance for creating one common global replacement refrigerant. SAE’s report was presented to 15 vehicle OEMs (from China, France, Germany, India, Italy, Japan, Korea, Sweden, UK and USA,) and to 18 tier one suppliers (from Asia, Europe and USA) for evaluation.

SAE’s results from the CRP1234 programs that investigated R-1234yf as a refrigerant for use in mobile A/C systems are available online at

Following the release of SAE’s report, the European Patent Office said it planned to grant a patent for the new, low GWP refrigerant.

Refrigerant manufacturers DuPont and Honeywell, working with the auto industry, jointly led the development of HFO-1234yf and was grateful for the patent opportunity.

“We are pleased that the European Patent Office has communicated its intention to grant a patent for the use of HFO-1234yf in auto air conditioning,” said Diane Picho, global business manager, DuPont Refrigerants. “DuPont will continue commercializing this environmentally preferable product with the additional intellectual property protection that this granted patent affords.”

DuPont also said it is conducting lab and field tests to evaluate HFO-1234yf and other refrigerants with similar attributes as more sustainable cooling solutions for stationary air conditioning and refrigeration.

The recent attention of HFO-1234yf may also deliver a blow to the CO2-based R-744-type vehicle A/C systems that had been under development in Europe.

While CO2 has a GWP of only 1, industry insiders said they don’t believe the automotive industry would be able to develop and market two different styles of A/C systems, and that HFO-1234yf units would be the logical choice over the high-pressurized CO2 systems.

New Refrigerant Gets the Cold Shoulder
However, the move to the new refrigerant in the U.S. hasn’t been a “SNAP.” Recently, the EPA decided to extend, for the second time, the comment period regarding the approval of HFO in new vehicle systems under the SNAP program. The latest comment extension was granted until Feb. 15.

The EPA said it was allowing stakeholders to consider some new information issued by the agency, namely a significant new use rule for HFO-1234yf, which would require manufacturers and importers of the refrigerant to notify EPA of any uses that differ from those outlined in premanufacture notices already filed with the agency.

Overall, the EPA’s document finds that there are no risks from the manufacturing, processing or use of this refrigerant if it is handled under the conditions filed with the agency.

Basically, this means no significant industrial or commercial worker exposure, no ‘‘do-it-yourself’’ consumer exposures and the HFO can be used only in new motor vehicle A/C systems and not retrofitted into existing vehicles.

One automotive association taking advantage of the extended SNAP comment period was the Automotive Recyclers Association (ARA).

While ARA said it fully supports the intent of the SNAP program to evaluate and regulate substitutes for the ozone-depleting chemicals that are being phased out under the stratospheric ozone protection provisions of the Clean Air Act, the association is urging the EPA to look at the total lifecycle of the fluid, and consider all ramifications that may occur from the use, and ultimately, the disposal of the new refrigerant.

ARA has raised several areas of concerns regarding potentially adverse consequences from the use of the new refrigerant. In comments provided to the EPA in early February, ARA outlined those concerns to include the recyclability, safety and feasibility of HFO-1234yf regarding the environment, automotive recycling employees and the general public.

As advocates for the professional automotive recycling industry, ARA’s concerns target the storage, disposal, occupational hazard, internal cost associated with specialized equipment, impact on air quality and storm water run-off requirements.

The specific questions raised highlight the need for further information and in-depth research for handling this new refrigerant during the dismantling process of an end-of-life vehicle, to identify any associated occupational dangers or potential costs that could be incurred by automotive recycling facilities and their employees, or any environmental impact it may have to the public regarding air quality or storm water run-off, which are two key issues of concern for the professional automotive recycler.

The current ruling, according to the ARA, does not address these concerns with any specificity. The EPA expressed a willingness to address these issues and gain more of an understanding about the automotive recycling industry as it moves closer to administering a final rule.

“ARA is pleased that the EPA will address end-of-life disposal specifications in a follow-on rulemaking, and looks forward to working with EPA staff on this matter,” said Michael Wilson, ARA executive vice president. “Professional automotive recyclers have the expertise, availability and willingness to assist the EPA with reaching a final decision that protects the environment, addresses safety concerns and imposes the least amount of undue burden on the automotive recycling industry.”

See how this this refrigerant may effect your shop, technicians and bottom line in the latest article from Ed Sunkin — The Impact of HFO-1234yf on Service Shops


You May Also Like

Child Labor for Repair Shops

This could be a chance to introduce teenagers to the auto care industry.

I saw something while walking into a retail parts store recently. It was a large sign stating they’re hiring at age 16. I think this is a brilliant move! It could help solve some labor shortages while creating future employees for the auto care industry.

I realize this could be a polarizing issue for those on both the left and right. Some see it as a pro-business move to alleviate post-pandemic labor shortages. Others see it as a way for big corporations to hire cheap labor. Myself? I am taking the long-term view on the opportunity because it is a chance to introduce teenagers to the auto care industry.

MEYLE Expands Electronics, Sensor Product Portfolio

The focus is on assistance systems and engine and transmission management, with more than 300 new part numbers.

FCS Introduces 42 New Numbers in May

Complete strut assemblies, shock absorbers, shock absorber assembly kits and suspension struts for popular VIO applications are included.

Philips Ultinon Drive 5000 LED Lightbar Line Expands

Lumileds has expanded the Philips Ultinon Drive 5000 series to include eight models.

DMA Adds New BrakeMaster Coverage

New coverage for Ford and Chevy includes popular pickup trucks and SUVs.

Other Posts

The FTC’s rule is set to take effect in about four months, unless it is blocked by legal challenges.

Akebono Expands Severe Duty Disc Brake Pad Kits

Akebono said it expanded its severe-duty ultra-premium disc brake pad line by 14 new part numbers.

GSP Releases New CV Axle Part Numbers

GSP said 14 new CV axle part numbers are in stock and ready to ship.

BCA Bearings Unveils 2024 Endless Summer Promotion

The Endless Summer promotion runs from May 1 through June 30, 2024.