The main problems technicians will encounter are pulsation and judder from the front brakes.
This instrument is fitted with 13.75-in. braided stainless steel lines, includes 360-degree swivel at each end.
By using the #HandsOnHomeSchool on social, participants will get up to two official Quadratec #HandsOnHomeSchool T-shirts.
The multi-year agreement kicks off with the Snowbird event on Jan. 2, 2020, in Bartow, Florida.
The customer may describe a creak or squeak noise coming from the front suspension. The noise is typically more noticeable during cold temperatures below 40 degrees. The noise may go away when the vehicle warms up.
Dana Inc. has introduced a new line of axles with AdvanTEK technology that will be featured on every Jeep Wrangler JL straight from the factory.
To remove and replace the rear brake pads or rotors, the electronic parking brake actuator must be retracted before removing the caliper assembly.
The customizable Dana 60 front and rear axles allow different width and center drop dimensions for Jeep TJs and XJs, rock crawlers, bouncers and other off-road vehicles.
Overall, the 2002-2010 Jeep Liberty is an easy vehicle to align. But, you have to pay attention during the initial inspection.
Jasper Engines & Transmissions has announced the release of additional stock numbers to its remanufactured transmission product line.
2011-’14 Compass/Patriot 2011-’12 Caliber Condition: The driver may describe creaking or squeaking noises coming from the front suspension. The noise is typically more noticeable during cold temperatures below 40°F. The noise may go away when the temperature warms up. Cause: The front lower rear control arm bushing is making the noise. Remedy: Lubricating the bushing
The Liberty’s front suspension uses upper and lower control arms. The replacement of the upper control arms can be tedious and require the removal of the battery tray, power distribution center and other components to get at the passenger-side upper control arm.