Cracking the Code: Understanding Friction Material Edge Codes
Just about every brake pad or shoe you install has a cryptic code printed on the side of the friction material. As a technician, being able to read this code is just as important as the Dewey Decimal system is to a librarian. The “Edge Code” can tell you information about the product you are
Hydro-Boost Power Assist Systems: Operation Diagnosis and Repair
The hydro-boost uses the hydraulic pressure from the power steering system to provide the driver assist in applying the brakes.
Rotors and Pads: Analyzing Replacement Options
Although the industry has seen anti-lock braking systems (ABS) become standard equipment on modern imports, the majority of brake service still focuses on the replacement of brake pads and rotors. Rotor replacement, of course, has changed because new rotors have become a more cost-effective method of resolving pedal pulsation and brake shimmy problems associated with
Parking Brakes: The Forgotten Fourth Pedal…Or the Seldom-Used Stick
How Much Is Really Enough?
Basic Brake Hydraulics
Anyone who works on brakes should be familiar with basic hydraulics and the various components that make up the hydraulic portion of the brake system. So if you’re not as familiar with this subject as you should be, keep reading and we’ll refresh your memory. We’ll start at the heart of the system, which is
The Forgotten Fourth Pedal…Or…The Seldom-Used Stick
On some vehicles it is the forgotten fourth pedal. The emergency or parking brake is a critical component of the brake systems that should not be ignored. Though most motorists seldom use their parking brakes, it is a required safety device and must work properly when called upon to keep a vehicle stationary. The main
Brake Tech Update: Uncovering Brake Fluid Leaks on Acura Integras
The brake fluid level on 1994 Integras may be low in the ABS reservoir, and fluid may appear to be leaking from under the label on the ABS accumulator. The likely cause is that the ABS accumulator internal O-ring is damaged, allowing brake fluid to leak out. Diagnosis: Remove the label from the ABS accumulator.
Brake System Service: Eliminating Noise and Vibration Problems
Brake noise and vibration are two things few people will tolerate for very long ‹ especially owners of high-performance European sports cars and luxury sedans that are renowned for their eye-popping stopping power. People who spend upward of $30,000 or more for an upscale Asian or European nameplate usually expect their brakes to be quiet.
Always Inspect Hardware During Brake Repairs
Though it isn’t required, many brake experts recommend replacing the drum hardware when the brakes are relined to restore the brakes to like-new condition. But often the hardware isn’t replaced because it doesn’t seem necessary. Unless the hardware is badly corroded or shows obvious signs of stress, like severe heat discoloration or other visible damage,