Region VIII Alliance Educates OSHA, Employees and Students on Automotive Lift Hazards

Region VIII Alliance Educates OSHA, Employees and Students on Automotive Lift Hazards

OSHA's Region VIII’s Bismarck, North Dakota Area Office signed an Alliance on October 2, 2006 with the Automotive Lift Institute (ALI) and automobile dealer associations in North and South Dakota to reduce and prevent workplace hazards associated with ....

OSHA’s Region VIII’s Bismarck, North Dakota Area Office signed an Alliance on October 2, 2006 with the Automotive Lift Institute (ALI) and automobile dealer associations in North and South Dakota to reduce and prevent workplace hazards associated with automotive lifts. The participating automobile dealer associations are the Automobile Dealers Association of North Dakota, South Dakota Automobile Dealers Association and South Dakota Independent Automobile Dealers Association.

One of the Alliance’s goals is to add automotive lift safety information to the curriculum of trade schools and career education centers. To that end, the Alliance participants worked with the North Dakota Department of Career and Technical Education to add information on automotive lift training to its safety and health curriculum.

To further the Alliance’s goal of disseminating automotive lift safety information, ALI has distributed its automotive lift safety training materials to other Alliance participants, companies throughout OSHA Region VIII (which includes North and South Dakota, Colorado, Utah, Montana, and Wyoming), On-site Consultation Programs, and OSHA staff around the country.

ALI President R.W. (Bob) O’Gorman gave a presentation at the OSHA On-Site Consultation Training Conference in Seattle, WA, on April 30, 2008. The presentation was designed to educate On-site Consultation Program staff on the hazards and safe work practices associated with automotive lifts. ALI also sent its lift inspector/operator training package to the On-site Consultation Program offices in all 50 states. The training package includes:

  • ALI’s safety manual and companion DVD entitled "Lifting It Right." The 24-minute DVD is hosted by racing legends Richard and Kyle Petty.
  • Three American National Standards Institute (ANSI) standards on automotive lifts: 1) ANSI/ALI ALOIM:2008 – Standard for Automotive Lifts – Safety Requirements for Operation, Inspection and Maintenance; 2) ANSI/ALI ALCTV:2006 – Standard for Automotive Lifts – Safety Requirements for Construction, Testing and Validation; and 3) ANSI/ALI:2001 – Standard for Automotive Lifts – Safety Requirements for Installation and Service.
  • Automotive Lift Safety Tips Sheet. This special edition of ALI’s Tips Sheet, which includes both the ALI and Alliance logos, is designed to be posted in workplaces with automotive lifts.

In July 2008, ALI shipped its automotive lift safety training package to every OSHA Area Office. This material will help OSHA’s Compliance Assistance Specialists and other staff learn about the safety hazards associated with automotive lifts and provide outreach to employers and employees in this industry.

In addition, ALI developed a 16-page pamphlet called "Service Bay Safety – How Safe Is Your Shop?" ALI shipped copies of the pamphlet to approximately 120,000 automotive shops across North America. ALI also shipped 1,000 copies to the Bismarck Area Office and 100 copies to each OSHA Area Office across the country.

"As a result of ALI’s Alliance with OSHA, there has been a significant increase in interest from lift users and owners in ALI’s mission to promote the safe design, construction, installation and use of automotive lift products," said Bob O’Gorman.

During 2007 and 2008, OSHA staff from the Bismarck Area Office met with representatives from the automobile dealer associations participating in the Alliance to provide information on the Alliance and the Area Office’s Local Emphasis Program on automotive lifts. OSHA staff also provided these associations with information about automotive lift safety to publish in their newsletters and websites. In addition, Area Office staff provided training to the North and South Dakota On-Site Consultation Programs on automotive lift inspections and the ANSI/ALI standards.

As part of the Alliance’s goal to promote the national dialogue on automotive lift safety, Scott Overson, an OSHA Compliance Safety and Health Officer from the Bismarck Area Office, serves on the review committee for the ANSI/ALI ALOIM Standard. "While we still have work to do to improve safety in automotive shops," said Overson, "this Alliance has been successful in raising awareness concerning inspection and maintenance procedures in companies that are members of the automobile dealer associations participating in the Alliance."

You May Also Like

BendPak Founder Don Henthorn Passes Away

Grew company from small machine shop to global leader in car lifts and garage equipment.

Don Henthorn, owner and founder of BendPak Inc., peacefully passed away at home Thursday, March 28, at the age of 85. Under his leadership, BendPak has grown from a small machine shop to one of the world’s leading manufacturers of car lifts and automotive service equipment.

Management and operations of the privately owned company are unchanged. 

ASE Practice Tests Available Online

You can get a good idea of what to expect by adding the official ASE practice tests to their study plans.

AACF Celebrates 65 Years Serving the Aftermarket

AACF will be announcing more details about this commemorative fundraiser April 1st.

Auto Care Association Launches REPAIR Act Video

The goal is to emphasize the need for federal REPAIR Act legislation, according to the Auto Care Association.

Valvoline Celebrates Female Service Center Employees

Valvoline is launching a social media campaign led by its female experts who are sharing automotive preventive maintenance tips to promote accessible vehicle care for all.

Other Posts

ASE Education Foundation, Goodguys Continue Partnership

Goodguys is one of many industry relationships the foundation has developed to help solve the technician shortage.

BorgWarner Announces Plan to Reduce Supply Chain Emissions

A partnership with Manufacture 2030 will support BorgWarner in reaching its Scope 3 emissions reduction goal.

Mevotech Releases 237 New Chassis, Control Arm, Wheel End Parts

The release boosts coverage for domestic and import passenger vehicles, pickup trucks, SUVs and EVs up to model year 2023.

MEMA Celebrates 120th Anniversary

MEMA said the milestone “underscores the association’s enduring legacy and its pivotal role in advancing the future of mobility and the interests of vehicle suppliers.”