Quick Answer: What Else Should Be Replaced With The Strut?

VIDEO: What Else Should Be Replaced With The Strut?

Complete a thorough inspection to increase profitability. This video is sponsored by Auto Value and Bumper to Bumper.

If you are replacing a strut on a vehicle, you need to inspect the sway bar links and look up if there are cam bolts that can make camber adjustable. The sway bar links will make sure the suspension is silent after the strut is replaced and they probably need replacement due to wear. Cam bolts that hold the knuckle to the strut can allow for camber adjustments during the entire life of the vehicle. This video is sponsored by Auto Value and Bumper to Bumper.

You May Also Like

Limited Slip Supplement (VIDEO)

If the frictional properties are not correct, chatter will occur. Sponsored by Lubegard.

Welcome to the Lubegard Limited Slip Supplement overview. Clutch-based limited slip differentials are common on many automotive applications like trucks and SUVs, but they present a unique problem. These differentials often use different clutch configurations, either cone or flat type, made with various materials and frictional requirements. When both wheels have ample traction, the clutch plates bind together tightly, sending consistent power to each wheel. When one wheel slips, additional power is sent to the other wheel based on the frictional properties of the clutch packs. This is where the gear lubricants frictional properties play an important role in functionality and performance.

Rust and Corrosion Preventive Oil (VIDEO)

Your tools and equipment need to be protected from rust. This video is sponsored by Lubegard.

Auto Pros Team Visits Hybrid Shop of The Carolinas

Auto Pros on the Road puts the Babcox team into shops across the USA. This episode is sponsored by Autolite.

Nissan Around View ADAS Camera Calibration (VIDEO)

Always calibrate the around view monitor system after a collision.This video is sponsored by Hunter Engineering.

Collision Blueprinting with Alignment Equipment (VIDEO)

An alignment is usually called for prior to ADAS calibrations. This video is sponsored by Hunter Engineering.

Other Posts

Active Ride Control Diagnostics

The key to servicing these systems is proper information and understanding precisely how these systems operate.

How To Answer Customer Ride Control Questions

Presenting your customer with inspection results and benefits of replacement will help sell the job.

Broken Springs

What is the cause for the failure? Why does it occur with specific vehicles? The answers might surprise you.

Tuning Adjustable Shocks and Struts

Let’s take a closer look at adjustable shocks and struts, what they do, and how one should go about adjusting them.