You searched for Bearings - Page 79 of 100 - Brake & Front End
Tech Tip: Understanding Why Alternators and Starters Fail

One reason why alternators have a high failure rate is because they’re always working under a load. Generating electricity to recharge the battery, run the fuel pump, injectors and ignition system, and power all of the vehicle’s lights and other electrical accessories places a substantial load on the alternator that generates a lot of internal heat.

Tech Tip: Noise, Vibration and Harshness Diagnosis

Since the earliest days of the automotive service business, "squeak and rattle" diagnostics has become a euphemism for low-profit, nuisance repair work. Unfortunately for those of us in the auto repair business, even our best customers have the occasional need for noise, vibration and harshness (NVH) diagnostics. On the plus side, if NVH diagnostics are approached in a methodical manner, profitability and customer satisfaction can be greatly improved.

MAHLE Clevite Inc. Announces New Contract with NASCAR Expanding Reach into Grass Roots Racing

MAHLE Clevite Inc. announced its continued support of NASCAR by signing a new contract for the 2008 season. A long time supporter of NASCAR racing, the company has extended its agreement to again sponsor the Nationwide Series, Craftsman Truck Series and at the grass roots levels of NASCAR.

MAHLE Clevite Inc. Announces Transition to MAHLE White Decal Beginning at 2008 Daytona 500

MAHLE Clevite Inc. has announced that beginning with the 2008 Daytona 500 in February, the company will begin the transition to the MAHLE white decal on the front fender of NASCAR vehicles. Emblazoned with big blue letters, the MAHLE white decal will take the place of the legendary Clevite blue decal and marks a new MAHLE identity throughout NASCAR.

Swaybar Tune Up

A long time ago in a service bay far away, the average tread life of a bias ply tire was 20,000 miles. Even with belted bias ply tires, you did well to get 30,000 miles. Shocks, ball joints and bushings averaged out at 40,000. Today, modern radials can get 60,000 and suspension parts can go

Diagnostic Solutions: Noise, Vibration & Harshness Diagnosis

Since the earliest days of the automotive service business, “squeak and rattle” diagnostics has become a euphemism for low-profit, nuisance repair work. Unfortunately for those of us in the auto repair business, even our best customers have the occasional need for noise, vibration and harshness (NVH) diagnostics. On the plus side, if NVH diagnostics are

Alternators & Starters: How and Why These Hard-Working Components Fail

One reason why alternators have a high failure rate is because they’re always working under a load. Generating electricity to recharge the battery, run the fuel pump, injectors and ignition system, and power all of the vehicle’s lights and other electrical accessories places a substantial load on the alternator that generates a lot of internal

Top NASCAR Engine Builders to Tackle Chevy RO7 Engines in 2008 MAHLE Engine Builder Showdown

MAHLE Clevite Inc. presents an exciting new challenge for the teams of NASCAR engine builders competing in this year’s MAHLE Engine Builder Showdown held in May at the NASCAR Technical Institute (NTI). After eight years of using NASCAR Sprint Cup 357-cubic-inch Ford engines, MAHLE Clevite is switching to Chevy RO7 engines for the event. Showdown teams race to build and successfully run their engines in the shortest time possible.

Tech Tip: Inspect the Spring-Loaded Automatic Belt Tensioner when Replacing Serpentine Belt

Most late-model engines have serpentine belt drives for the engine-driven accessories. And most people know that belts are a maintenance item and eventually have to be replaced. But many don’t know the spring-loaded automatic tensioner that keeps a serpentine belt tight is also a wear item. Consequently, the automatic tensioner may also have to be replaced when the time comes to change the belt.

MAHLE Clevite Demonstrates Leadership in Motorsports and the Aftermarket

Engine performance is a key aspect of winning NASCAR races, and more NASCAR races have been won with Clevite engine bearings than any other brand. Clevite bearings and other performance engine products from MAHLE Clevite Inc. – including Perfect Circle piston rings and Victor Reinz gaskets – are official NASCAR Performance Products.