Tech Tip: Durango Brake Shudder or Vibration
2003 Dodge Durango vehicles may exhibit pulsation or vibration in the brake pedal and/or steering wheels when the brakes are applied. The condition is most noticeable over 50 mph, but can occur at lower speeds.
Hyundai: From Ball Joints to Brakes…
Uncovering Needed Repairs With Undercar Inspections The brake and suspension systems on Hyundai’s popular line of cars and SUVs are both undercar systems where problems can be detected during routine maintenance. From loose ball joints to worn-out brakes, it’s all there to be checked while the vehicle is on the rack for service and, oftentimes,
Tech Tip: Is Caliper Replacement a Wheel of Fortune or Does it Sometimes Cost a Fortune?
Have you ever looked for something in the shop only to be frustrated when someone else comes by (usually the boss) and reveals the item right before your eyes?
Selling Services: Bleeding ABS Brakes after Component Replacement
Bleeding the brakes after brake components have been replaced is a step you don’t want to skip if you want a firm brake pedal. Air trapped in the lines, calipers or wheel cylinders will make the pedal feel soft and spongy. Air is compressible, so when the brakes are applied any air bubbles in the
Doing the ‘Complete’ Brake Job
Brake work continues to be a solid service opportunity for independent repair shops because brakes are items that inevitably wear out. Disc brake pads need to be replaced, and the rotors usually need to be turned or replaced. The front brakes do the most of the braking, so they receive most of the attention when
The Rip Off: Do you Love the Aftermarket?
A few weeks ago, I invited an old friend and former co-worker to lunch. I have to admit, my motives were not entirely focused on “catching up,” as he now works for a local company I have been eyeing as a potential customer for quite some time. Of course, I casually worked his company’s fleet
Nissan Tech Tip: Groaning/Grinding Noise from Front Brakes
Use this bulletin to service a 1998-2000 Quest if the vehicle’s front brakes make a loud, low-frequency groan/grind noise when stopping. The groan/grind addressed by this bulletin may occur at normal operating temperatures and is not a "creep groan."
Tech Tip: Engineering the Complete Brake Job
When brake linings are replaced, always follow your friction supplier’s guidelines. As a rule, linings should be replaced with ones made of the same basic type of material as the original linings (or better). Replace semi-metallic with semi-metallic, ceramic with ceramic, and nonasbestos organic (NAO) with NAO – or upgrade to ceramic.
Drum Brake Self Adjusters: Understanding These Ancient Devices
d bridge bolts. Opposing piston calipers are bolted to the knuckle and have pins to position the pads. Drum brakes have return springs to return the shoes to a rest position and hardware to hold the shoes to the backing plate. The shoes return to a fully retracted or rest position when the master cylinder
Subaru Brake System Service
Over the last 25 years or so, Subaru has been the top- selling all-wheel-drive car here in the Pacific Northwest. For beachcombers and skiers alike, as well as rock hounds and hikers, having all-wheel drive is a big plus. Stop-and-go commuting, and difficult mountain driving take their toll on both drivers and vehicles. Of all