Ford Mustang Alignment 2015-Current
The front suspension uses a MacPherson strut and two lower control links.
Ford Transit Alignment Spec
The Transit comes in 150, 250 and 350 sub-models. There is also a model with a dually rear axle.
Ford Flex 2013-2019 Alignment Spec
The normal alignment is changing. Control arms can still bend and bushings can degrade, causing the camber, caster and toe to change. But, modern cars not only need the angles to be in the green, but they also need to have the sensors calibrated.
Alignment Spec: Toyota RAV4 2006-2013
The third generation of the Toyota RAV4 shares all of the same infrastructure with the Corolla and many other Toyota vehicles. The front suspension is easy to adjust, while the rear needs a little more attention.
Toyota Sienna Alignment Service
When aligning this vehicle, there are three things you should know. First, a Sienna with stability control will require a recalibration of the steering angle sensor. Second, rear tire wear can be a problem on some AWD Siennas. Third, measure the ride height before trying to correct a front caster problem.
10 Alignment Tips To Help You See Past The Angles
Suspension angles are dynamic. As the body moves, the camber, caster and toe will change in the front and rear. OEMs tune these angles for the best tire wear and stability at a set ride height. If a spring is weak or missing a coil, the alignment angles will be off from these calculations.
Post-Collision Alignment: Working All The Angles
Collisions with potholes, curbs and other vehicles are inevitable. While damage to the body is easy to spot, damage to the suspension and the safety systems can be challenging to detect.
2010-2013 Ford Transit Connect Alignment Specs
The Ford Transit Connect is, perhaps surprisingly, based on the Ford Focus. The front suspension is the same, but the rear uses an axle tube mounted on two leaf springs. The van has a cult following with taxi cab fleets, contractors and private owners.
Alignment Specs: Subaru Legacy 2005-2009
The fourth-generation Subaru Legacy was produced from 2005-2009. It was available as both a sedan and a wagon until 2008 when the wagon was dropped. The front suspension design uses a MacPherson strut and the rear suspension is a multi-link design that changes toe and camber dynamically as the suspension and body change position.
John Bean Adds New 12K 4-Post Alignment Lift System
Offering 12,000 pounds of heavy-duty lifting capacity in a compact package, the new John Bean 12K 4-Post Alignment Lift System provides shops with premium performance lifting options.
