You searched for Calipers and Hydraulics - Page 3 of 22 - Brake & Front End
Brake Job: 2007 GM Full-Sized 1500 Pick-Up and SUV

The GMT 900 debuted in 2007 as the replacement for the GMT 800. The first GMT 900 vehicle was the Chevrolet Tahoe, which arrived at dealers in January 2006. The GMC Yukon (regular and Denali) and Cadillac Escalade soon followed. Chevrolet Avalanches and Suburbans, GMC Yukon XLs, and Cadillac Escalade ESV and EXT were next to hit the roads.

Latest Toyota Recall Due to Replacement Brake Fluid and OE Seals

Toyota Motor Sales announced it will conduct a voluntary Safety Recall for a brake problem that occurs once the vehicle has been serviced with non-factory fill/genuine brake fluid. Drivers may experience a small amount of the brake fluid leaking from the brake master cylinder, resulting in illumination of the brake warning lamp.

Tech Tip: Mazda ABS Warning Light On and Grinding Noise from Front Wheels

If a customer brings in a Mazda with an ABS warning light and a grinding noise from the front wheels, it could be due to problems with the sensor rotor or with the front brake disc, depending on the model.

Tech Tip: Avoid Damaging VW/Audi Rear Calipers

Electronic Parking Brake (EPB) technology

Brake Tech Feature: Rotors and Friction Service

Years ago, a brake replacement would pass muster if it allowed a vehicle to stop in a reasonable distance at highway speeds. Today, a brake replacement must meet consumer-oriented criteria in areas of braking noise, pedal sensitivity, side-to-side pulling, pedal pulsation, frictional qualities, fade resistance, wheel dusting and friction longevity.

Chrysler Recall: 24,177 Rams, Sebrings, Avengers, Nitros, Commanders, Grand Cherokees and Liberties recalled for brake booster input rod retaining clip

Chrysler will recall 24,177 vehicles due to a potential problem with the retaining clip that holds brake booster input rod in place. The clip from A WT Metal Specialties was improperly manufactured and could not provide enough tension to keep the rod in place.

Impressive Year-End Numbers Announced by Raybestos Brand

2009 was an extremely busy manufacturing year for Raybestos brand products. The Raybestos brand, a member of the Affinia family of brands, produced 1,400 new brake numbers and 539 new chassis numbers over the past year.

Tech Tip: GM Malibu, Alero and Grand Am Brake Creak When Brakes Applied

Some GM vehicle owners may comment on a creak-type noise when applying the brakes. It is usually heard only during slow speed braking.

Tech Feature: Nissan Brake and Suspension Repairs; Solving Noise Complaints

At first, you may not think brake and suspension systems are closely related. But when it comes to noise and vibration complaints, you don’t want to be looking at one without considering the other.

Bleeding ABS Brake System: Why Brake Fluid and Lines Degrade

According to R. L. Polk, the average age of the vehicles on U.S. roads was 9.2 years in 2007 with 41 percent of the vehicles 11 years or older. This high median age is a good reason to consider the condition of the brake fluid and bleeding procedures when performing maintenance or repairs. Maintenance or repair of an Anti-lock Brake System (ABS) system can require the opening of the hydraulic system. Any time the hydraulic system is opened, air can be introduced into the lines and components.