Why Brake Pads and Rotors Should be Replaced Together
Brake pads and rotors should always be replaced in pairs. Pairing new pads with worn rotors could cause a lack of proper surface contact between the pads and rotors, resulting in noise, vibration, or less-than-peak stopping performance. While there are different schools of thought on this paired part replacement, at ADVICS, our technicians always recommend
O’Reilly Unveils BrakeBest Select Pro Pads and Rotors
The private-label pads and rotors are available online and in O’Reilly stores nationwide, including Puerto Rico.
Quality-Built Brake Pads and Rotors Powered by MPA
Backed by over fifty years of product innovation and engineering expertise, Motorcar Parts of America is proud to announce the addition of Quality-Built replacement brake pads and rotors to our extensive product portfolio. This full line of brake system components provides a wide range of application coverage and options for every type of driver and
VIDEO: ACDelco Brake Pads And Rotors
When it comes to brakes, small details can make the biggest difference. This video is sponsored by ACDelco.
Continental Now Offering European Coverage With ATE Brake Pads And Rotors
ATE Original Brake Pads and ATE Single Pack Rotors minimize noise and vibration, according to Continental Commercial Vehicles & Aftermarket.
BRAKE JOB: 2004-2009 Mazda3 Pads, Rotors And Parking Brake
The 2004-2009 Mazda3 is based on the Ford global C1 platform, shared with the European Ford Focus and Volvo S40. Nothing is really groundbreaking about the brake system, but not paying attention to the details can end in a post-brake-job comeback.
BRAKELIGHT: Two Piece Rotors
This rotor gives a new meaning to “two-piece rotor.” According to Andy Polin of AB&S Undercar Specialists, the customer wanted to know why they did not replace the rotors with two-piece rotors like those that were originally on the car.
Top 10 Brake Job Mistakes For Pads, Rotors And Calipers
Here are the top 10 brake job mistakes made by rookie technicians when replacing brake pads, rotors and calipers. 10. Not cleaning the brake slides and hardware: Just slapping new pads where the old pads once resided never works. The slides and abutment clips should be cleaned and/or replaced.
Stop the ‘Warped’ Rotors Myth and Service Brakes the Right Way
Myths take hold because either A) they seem completely logical or B) they are so often repeated that they just become common knowledge. The warped rotor myth is a little bit of both. A rotor that contributed to a pulsation condition certainly appears “warped.” Plus, everyone says it — even technicians that know the rotor
New Raybestos Brand Brake Pads And Rotors Added For Late Model Foreign And Domestic Applications
Raybestos brand brake parts – a member of Brake Parts Inc. (BPI) – has begun adding listings for the 2014 model year, with coverage for nine makes and 13 2014 models.