Turn to Delphi Technologies for Tie Rod Ends
We’ve got you covered. Delphi Technologies has the tie rod SKUs you need, including the right hardware where needed for easy installation, for popular applications like the Ford Explorer, Dodge Ram 1500, Jeep Wrangler, Honda Civic, VW Golf, Chrysler 300 and more. Intelligence in engineering.We start with the OE design and conduct extensive dimensional and
Worn Tie Rod Inspection: Discovering The Danger Zone
Excessive tie rod play is difficult to ignore for any driver. It may start with tire wear on the inner edge of the front tires. Next, there could be a slight knocking during braking or acceleration. Last, tie rod play could manifest itself in a knocking noise while turning.
Elgin PRO-STOCK Brand Introduces U.S.-Manufactured One-Piece Thick-Wall Performance Push Rods
The Elgin PRO-STOCK brand has introduced a broad line of one-piece thick-wall performance push rods that provide up to 40 percent greater column strength and increased stiffness over conventional, 0.080-in.-wall rods, said the company.
Problems That Plague Chrysler’s 3.5L Engine Create Rebuild Opportunities
If ever there was a service opportunity ripe for the taking, Chrysler’s 3.5L SOHC V6 engine (and its 2.7L, 3.2L and 4.0L cousins) is it. This engine was introduced back in 1993 as an “upgrade” from the earlier 3.3L pushrod V6 engine. Some would question whether the move was a step forward or backward because the 3.5L V6 (and its variants) has a poor reputation for reliability.
Backyard Engineers: When Realities Clash
During the years and years of running my shop, I have run across a lot of hot rods, home built contraptions, and those “super-upper, make it better than the factory did” cars. I sometimes wonder why I take on these projects – maybe it was slow that day and I needed something to do. Or, the owner may have had one of those personalities and charisma that made me want to truly believe in their dream as much as they personally did.
Tech Tip: Ford and Lincoln Tie Rod Inspection Procedure
Check the outer tie rod ends by grasping by hand and push up and down. Check the inner tie rod ends, pushing them front to rear. If any free play is observed in a joint, it is worn and should be replaced. Keep reading for additional Ford and Lincoln tie rod inspection tips.
Tech Tip: Ford and Lincoln Tie Rod Inspection Procedure
Check the outer tie rod ends by grasping by hand and push up and down. Check the inner tie rod ends, pushing them front to rear. If any free play is observed in a joint, it is worn and should be replaced.
Tie Rod Geometry
Keeping the angles in line with Ackermann Most people consider the common tire rod to be low tech. But, when you consider how front suspensions have evolved from straight axles to independent designs, the tie rod has had to adapt to new angles and geometry. Keeping it on the road was simple with the straight
VIDEO: A Suspension Inspection Lesson
There is no such thing as a casual suspension inspection. The safety of the driver depends on the condition of the tie rods, ball joints and other suspension components. Sponsored by Auto Value and Bumper to Bumper.
Delphi Technologies To Become Full-Line Chassis Supplier, Accelerates Engine Management Product Line Expansion
The chassis program includes control arms, tie rods, inner and outer tie rod ends, sway bar links, ball joints, bushings, drag links, idler arms, pitman arms, trailing arms and more.