Mitch’s World: Stuck in First…

Mitch’s World: Stuck in First…

This isn’t going to be a long diatribe about something that happened in the shop yesterday or the day before. It isn’t going to be another rant about customers who don’t understand or suppliers who don’t care. This column is about today. Perhaps, more important, it is about tomorrow.

This column is all about you. It’s about your words, your thoughts, your feelings and what you had to say about a subject that is not going away until you and I send it away: a subject far too important to trivialize with a little bit of “clever” or “contrived.”

At its core, this is all about who we are and what we are all about: how we really feel about ourselves, each other and what we have chosen to do with our lives.

I won’t promise you unbiased, dispassionate or moderate: I can’t. My passion for this industry and the people in it is no secret. It’s documented: chronicled over the past 25 years.

Besides, I can’t be objective about the problems you face as a professional, or we face as an industry any more than a beat cop can be objective about street crime. Your ability to remain objective evaporates when you’re wrestling with the same demons you are trying so hard to understand. It’s impossible to remain detached when the struggle you are observing is your own: unrealistic to try and suppress your emotions when the issues you’re trying to understand impact you in the same powerful and personal way they impact the people you’re writing about. Like you, I live this industry every day – the good and the bad, the beautiful and the not so beautiful.

Just a few months ago, I wrote about this industry being stuck in first gear with journeyman-level technician earning’s documented by the Bureau of Labor Statistics at a median of less than $35,000 per year: $33,050 to be exact. (See November, 2007 issue.) While you could “optimistically” argue that this statistic reflects the fact that fully one half of those individuals surveyed made more than $33,050: it just as clearly reflects that fully one half made less.

These numbers were accompanied by research projecting the number of individuals in our industry who would soon be retiring, as well as a number for those who would be exiting for reasons other than retirement and a formula that calculated the replacement cost of an experienced employee as a function of annual salary at 50%: any employee, any age, any industry.

Extrapolating the numbers is the work of research scientists, mathematicians and statisticians: not, the likes of you and me. You and I, however, are forced to live with the reality of what these numbers mean and the real-world impact they are likely to have.

Like the student who asked his economics professor what the difference between a ‘recession’ and a ‘depression’ was, and was subsequently instructed that it’s a ‘recession’ when your next door neighbor is out of work and a ‘depression’ is when you are the one unemployed: the fact that this is our industry and these are our numbers tears away all the theories and hypotheses. The fact that we have to deal with what these numbers mean on the service bay floor and at the service counter on a daily basis makes it all very personal, something you made elegantly clear in your e-mails: e-mails just as powerful and disturbing as the problems we face.

It didn’t matter if you were the 16-year, CMAT – L1, veteran, working for a large retail operation, who started his career washing cars and sweeping out service bays, sharing his frustrations about the lack of respect and inadequate compensation associated with a constant diet of vehicles that were misdiagnosed by other, inadequately trained and less-skilled technicians, working for the same company under the same banner. Or, the 51-year-old, anti-union, Master Certified shop owner in Maryland whose body will no longer cooperate and who sees no other way to ensure a viable future for those who will follow us other than to unionize.

Feedback Files
The responses I received all shared the same desperate anger and passion. And, like the melody you can’t seem to get out of your head: each e-mail shared at least one element of a refrain that has become all too familiar to those of us who have been battling these problems for what seems like an eternity.

Because so many of us migrated from the shop floor to the office, because all of us have experienced the frustration and the rage: we understand. We are ‘all’ the tech who walked away from this industry: the one, who at 40 went back to school at night, full-time, for a year in order to pursue a career as a PC-LAN Administrator because he had hit his “Glass Ceiling” in the service bay. And, why not: who has a better understanding of computers interacting with each other: or, with everyone and everything else, than we do? How different are the skill sets, how much ‘more’ do you have to know in order to repair or reprogram that notebook or laptop computer?

From the very first time I ventured forth out of the shop to address the Equipment & Tool Institute in the Fall of 1984, my contention is and has always been pretty simple: if you can inspect, test, evaluate, analyze, diagnose and repair a late-model vehicle effectively and efficiently – any kind of vehicle…You can do just about anything you want: become successful at just about anything you can! And, just about “anything” will pay more, provide greater security and include better benefits with less wear and tear on your body!

Each of us is the technician I feared might leave the industry in 1984. The one who did leave a decade latter: the tech who still misses the challenge, the business, the people; but, won’t shed a tear over the lack of adequate compensation, appreciation or recognition.

Our paradigms are dysfunctional; our models antiquated. Because there is no oversight, no organization, no structure: there is no consistency, no standards and no accountability. Performance-Based Pay: Piece-work, Flag Hour, Flat-Rate – pay based upon the quantity of one’s efforts, work that assumes quality and effectiveness will be the natural result of “picking more strawberries,” has made the ‘Technician’s Earning Curve’ an aberration. The first five years in the Industry, the rate of compensation climbs almost vertically. With experience, training and the ‘right’ tools and equipment, compensation can continue to increase, albeit modestly…until the body or the mind can no longer continue working harder or faster. Then, earnings are limited and when the seasoned veteran technician can no longer keep up the pace or compete with younger, less costly (and, perhaps marginally trained) replacements, that technician – and the knowledge they have acquired over a lifetime of service – is unceremoniously discarded.

The Song Remains the Same
The recurrent melody: Technicians don’t make enough because the shop owners won’t charge enough! The chorus: Shop owners ‘can’t’ charge enough because the motorist refuses to pay enough! And, throughout this complicated symphony, a transcendent theme: an industry forced to exist at the lowest level of performance dictated by the least qualified, least able members of its constituency.

What have I told you that you don’t already know? There wasn’t anything new in the e-mails I received. These were all things I had heard before: more times than I care to remember. These responses were different, however: different in their honesty, in their intensity and in their eloquence. These were people like you and me pouring out their deepest thoughts and feelings about something intimate, something passionate. These e-mails were all about unrequited love: about giving everything you have to a relationship that is incapable, unable or unwilling to give enough back in return.

I understand the problems…So, do you. No one has to spell it out for us. There isn’t going to be an epiphany. We have the list, a list long enough to keep us busy for quite some time. We know we are going to have to come to terms with recruiting, retention, compensation, working conditions, recognition, appreciation and more.

But the fact that we’re frustrated, angry and upset doesn’t “fix” anything.

There is no question that we will need to achieve a higher level of understanding in order to address these issues. Einstein had it right! We aren’t going to solve these problems with the same level of understanding that created them! Neither are we going to address or solve these problems with the same level of cooperation, effort or engagement we have offered up in the past. This is about coming together as an industry – working together as an industry – to create programs sufficient in their energy, creativity and diversity to attack these problems successfully once and for all.

There are those among us who would rather not see the government involved when it comes to solving the industry’s problems. I understand. The government does not have a stellar record when it comes to helping anyone or solving anything. There are those among us who cringe at the thought of a union. As a business owner and former union member, I understand that as well. There are reasons enough not to do anything; reasons enough to fill a decent-sized auditorium. There aren’t enough reasons, however, not to try: especially when the whole industry is stuck in first gear.
Shifting Ahead
I would like to suggest we get this industry out of first gear by calling an industry-wide conference: a symposium of sorts. And, I would like every segment of the aftermarket to be included and involved. I would like it to conclude with a list of specific and actionable tasks not the least of which would be the development of licensing criteria for shops and enforceable standards of performance for technicians created and regulated by Industry, not by government. I want this conference to end with an industry united in purpose.

I want the industry out of first gear and I want it out now! So does the Automotive Aftermarket Industry Association (AAIA), Babcox Publications (publisher of Underhood Service) and the Car Care Professionals Network (CCPN). These three organizations are committed to leading the charge in changing this industry for the better. This process will begin with a number of educational tracks and forums that will be offered in Las Vegas, Nov. 4-7, 2008 at AAPEX: the Automotive Aftermarket Products Expo. Are you committed as well? This gathering won’t happen if all we do is talk about it. We’ve been talking about it far too long! Now we’re at the starting line, ready to go. But we need you! Step on the clutch, move the lever into a higher gear; and then accelerate… accelerate toward a better future!

If you’re truly interested in a better tomorrow, you’re going to have to get involved! Watch for upcoming details about this industry forum and how you can participate in what is likely to be the beginning of a revolution in this industry.

You May Also Like

Being Happy Gets In The Way of Being Successful

Bryce Kenny says his greatest satisfaction comes from helping others to find the courage to chase their dreams. 

When the workday is over, the tools are put away, the computers have gone to sleep, the customers have driven away safely and the last tech has clocked out, washed up and left the parking lot, do you ever just take a minute to put your hands on your hips, look around your shop, take a deep breath and think, “Is this really all there is to life?”

Quality Triumphs!

New technologies have changed how we interact with our cars. Now, replacement parts quality matters more than ever.

What ‘Family-Owned and Operated’ Really Entails

Having family as a part of your business creates a whole new dynamic that most people can’t comprehend.

It Ain’t Bragging If You Can Back It Up

It can be difficult to sit and read about yourself.

Putting Yourself First For Safety

Policies and procedures are only as good as those following them.

Other Posts

Why Is NHTSA Involved With RTR?

A closer look into NHTSA’s involvement with RTR.

Do OEM Service Bays Offer Opposition or opportunity?

With great power, of course, comes great responsibility.

How Effective Are Non-Competes?

NCAs restrict workers, hinder innovation, and impact employment options

Is Your Shop Being Robbed Right Now?

How prepared are you for the bad guys?