If the tool user is moving from job to job several times per day or rolling several hundred feet per day, a minimum caster size of five-by-two inches provides protection from obstacles and grates; manufacturers such as Snap-on offer six- by two-inch casters. Soft monoprene caster material that is quieter on bumpy floors will also keep tools from shaking around. If the technician uses the cart for drawer storage and accesses those drawers often, consider the comfort of the drawer pulls. Some pulls offer very little finger room and use cumbersome detents.
If the top of the cart is used as a work surface, consider the weight capacity and parts’ sizes. Some lids are constructed of stainless steel or heavy gauge material. If the material flexes, it is probably not designed to be a work surface. Consider the construction: chrome plated tubular stock, L-brackets, or a welded case design. An L-bracket design usually supports more weight than square stock. Carts which use a welded design, usually associated with tool boxes, have a more rigid case, giving the cart both high mobility and durability.
What about security? In many cases, a cart may need to be locked and unlocked several times per day. A simple, single hook lock may not last long in this scenario. Consider an internal locking lever/switch and two point lock bars for extra security. A lock with an independent rotating collar will outperform a simple cylinder lock and welded locking tabs on the back of the drawer add security against prying.
Is the cart a permanent location for the primary tools? Expandability may be required; some carts have an optional end cab that can be added. A 16- to 18-inch width is common for the lower cost carts; 20 to 24 inches provides more tool space and more drawer space. An open bottom tray is a convenient way to transport large bulky items. That is less expensive than all drawers, but it depends on the need for security. If open space is needed in the bottom tray, then the cost is much lower; if the bottom section needs to be secure, the cost is higher.
Welded case designs with more wide drawers, more tool box-like construction and locking drawers that can be opened or locked when the lid is down may be found in the premium storage units. Studying the features below, one can see where value comes in.
Overall Size Any cart more than 32 by 20 inches is considered large.
Drawer Capacity High-end carts offer 100 pounds per drawer; value carts offer 50 pounds or less
Drawer Width/Count – Wide, deep drawers are the most expensive.
Top Compartment Depth – A deep (five inches or greater) functional top compartment provides convenient space.
Lid Functionality Simple open top trays may be lower cost, but tend to be catch basins for junk. Flip lids and sliding lids cost more but have advantages such as secure storage in the top compartment. Some flip lids open automatically when unlocked. That may be an inconvenience when moving around the shop. Sliding lids can either be split in the middle and slide in both directions, or they can be one-piece and slide all at once. The value of either design depends on the size, weight and clearance required. A solid lid that can be used as a work surface and will hold more than 100 pounds is harder to find.
Drawer Retention Some carts have retaining latches to keep drawers from sliding open and damaging nearby vehicles, some carts, for example, are equipped with a latch that keeps drawers from drifting open.
Caster Quality Available options include anything from lower cost four by one inch stem casters to more expensive six by two inch 4-bolt vibration dampening casters.
Bumpers – Protect carts and nearby objects.
Drawer Pulls Premium carts tend to offer more finger room and comfort. The more a drawer is used, the more a generous drawer pull is appreciated.
Liners simple six-pound foam is found in less expensive carts and non-slip material in the higher end carts. Some carts can be upgraded.
Pry Bar/Screwdriver Storage – Some carts offer hanging/organizing space within the lid or as a side attachment.
Welds/Steel Gauge/Stiffness A fully welded design, such as a Snap-on 40 inch cart, is tested to endure a lifetime of use. Required length of service is always an important consideration. The real yearly cost is the overall price divided by anticipated years of use. For example, a $1,000 cart that lasts 10 years ($100 per year) might be a better choice than a $600 cart that lasts three years ($200 per year).
Color Palette and Paint Normally powder coat is more expensive and chemical resistant, and higher end carts tend to offer more color options.
Jobs and tools come in different sizes and functions, distinctive to the various ways in which professional technicians work. Understanding the needs of the tool users and choosing carts with the technician and job in mind is the key to choosing the optimal cart for each unique situation.