Holley Introduces Gen 3 Ultra Dominator

Holley Introduces Gen 3 Ultra Dominator

Holley introduces the Gen 3 Ultra Dominator featuring an all new main body, all new calibrations, high capacity fuel bowls and new larger sizes. They come in a variety of new sizes from 950 CFM, 1350, 1425, all the way up to 1475 CFM.

The original Dominator took carburetion to another level in 1969 when it was developed for NASCAR racing. It has been refined over the years, and is now receiving its biggest change ever.

Holley introduces the Gen 3 Ultra Dominator featuring an all new main body, all new calibrations, high capacity fuel bowls and new larger sizes. They come in a variety of new sizes from 950 CFM, 1350, 1425, all the way up to 1475 CFM.

They are also available in the standard 1050, 1150 and 1250 CFMs racers have come to expect. The main body is 5/16” taller than the previous generation, which allows for larger radius air entries that have been optimized on Computational Fluid Dynamics (CFD) software. Each Gen 3 Ultra Dominator received a new calibration optimized for today’s larger engines and newest fuels and were also dyno and track tested to ensure performance.

The venturi throat to throttle bore section is fully machined for predictable and repeatable performance and a new idle-bypass valve was incorporated to maintain proper throttle plate to transfer slot relationship on engines with radical camshafts.

Fuel enters the main body through a set of boosters with billet 12-hole inserts for superior atomization and crisp throttle response. A new modified-skirt booster is used on the larger CFM models to maintain a strong fuel signal. To keep up with today’s electronics, a throttle position sensor mount is featured on every main body and a sensor is available separately. Integrated air scoop mounting bosses are also new to the Gen 3 main body.

The linkage is all external and tuning is easier than ever with threaded secondary links to adjust from 1:1 to soft progressive. Curb idle screws are knurled for quick adjustments without a screwdriver.

Holley’s popular HP fuel bowls are carried over to this line with eight O-ring inlets, fuel level sight windows, 20% higher fuel capacity, drain plugs, internal baffling, and more. The Gen 3 Ultra Dominators are available in a tumble polished finish with Red  or Black metering blocks or hard anodized Hard Core Gray main body with Black metering blocks.

You May Also Like

Coats Expands Maxx Tire Changer Line With MAXX 50

The base Maxx tire changer platform now comes in 4 models total.

The Coats Company proudly announces the expansion of their Maxx tire changer line with the Maxx 50 tire changer. The Maxx 50 tire changer features many of the key Maxx features but gives low-volume shops the ability to get a best-in-class tire changer with only the essential tools they need. 

Transmissions – CVT

Knowing what the common issues are & understanding the options available to isolate & fix problems are the keys to success.

Simplifying AWD Systems

No matter the manufacturer, there is almost always an all-wheel drive (AWD) option for most platforms.

Manual Transmission Service

Parts that wear out must be replaced.

Transmission Fluid Hydraulics

You need to know how transmission fluid flows inside an automatic transmission.

Other Posts

AP Emissions Unveils August New Product Announcement

10 new 46-state Federal EPA part numbers have been released.

Hunter Engineering Expands Supply Capabilities in Missouri

Company continues to efficiently serve customers despite supply chain challenges.

Autel Adds EV Diagnostics, Maintenance to Class Roster

Classes are intended for current and potential owners of Autel EV diagnostic tablets.

SMP Expands Emission Control Program

SMP’s Emission Control program offers more than 1,500 EVAP components and 4,000 products for crankcase and EGR emissions.