Ford Focus: Engine Vibration at Idle

Ford Focus: Engine Vibration at Idle

Some Ford Focus vehicles may exhibit an excessive engine vibration when idle. The vibration is most noticeable when the transmission is engaged in reverse. This condition may be caused by small stones, road debris, ice or snow packed/lodged in the rear engine roll restrictor. Models: 2000-'11 Focus

Models: 2000-‘11 Focus
Some Ford Focus vehicles may exhibit an excessive engine vibration when idle. The vibration is most noticeable when the transmission is engaged in reverse. This condition may be caused by small stones, road debris, ice or snow packed/lodged in the rear engine roll restrictor.
Action
Inspect the rear engine roll restrictor for debris and install a service shield if necessary.
Service Procedure
1. Inspect the rear engine roll restrictor for debris.
2. Remove any debris from rear engine roll ­restrictor.
3. Remove the cross member-to-roll restrictor attachment bolt.
4. Install service shield.
5. Install roll restrictor attachment bolt and torque to specification.
a. 2000-‘07 model year vehicles. 47 Nm (35 ft.-lb).
b. 2008-‘11 model year vehicles. 70 Nm (52 ft.-lb).
Courtesy of MotoLOGIC® Repair & Diagnostics: www.motoshop.com/motologic

You May Also Like

Transmissions – CVT

Knowing what the common issues are & understanding the options available to isolate & fix problems are the keys to success.

All transmission models have unique problems that are common to that model; JATCO CVT units are no exception. Technicians are facing an uphill battle when it comes to diagnosing and repairing CVTs if they don’t have the right information on hand. Knowing what the common issues are and understanding the options available to isolate and fix problems are the keys to a successful repair.

Simplifying AWD Systems

No matter the manufacturer, there is almost always an all-wheel drive (AWD) option.

Manual Transmission Service

Parts that wear out must be replaced.

Transmission Fluid Hydraulics

You need to know how transmission fluid flows inside an automatic transmission.

Advanced Wheel Bearing Diagnostics

Can a bump set a wheel speed sensor code?

Other Posts

How Well Do You Know Your Driveshaft?

There are three types of modern driveshafts with multiple configurations.

Transmission Service

The following is an example of a dishonest vehicle and how to go about catching it in its lie.

Limited-Slip Differentials And Diagnostics

A limited-slip differential helps to control the tangential forces.

Seven CV Joint Mistakes You Shouldn’t Make

If a CV joint fails, it rarely fails on its own. Outside factors can damage a joint worse than cutting a boot with a knife.