Ford, 3M, GE, UAW Change Gears

Ford, 3M, GE, UAW Change Gears

These companies are working together to speed production of respirators for healthcare workers, ventilators for Coronavirus patients.

Ford Motor Co., joining forces with firms including 3M and GE Healthcare, is lending its manufacturing and engineering expertise to quickly expand production of urgently needed medical equipment and supplies for healthcare workers, first responders and patients fighting coronavirus.

In addition, Ford plans to assemble more than 100,000 face shields per week and leverage its in-house 3-D printing capability to produce disposable respirators for healthcare workers.

“This is such a critical time for America and the world. It is a time for action and cooperation. By coming together across multiple industries, we can make a real difference for people in need and for those on the front lines of this crisis,” said Bill Ford, Ford’s executive chairman. “At Ford, we feel a deep obligation to step up and contribute in times of need, just as we always have through the 117-year history of our company.”

Powered Air-Purifying Respirators

Ford team members are working with 3M to increase the manufacturing capacity of their powered air-purifying respirator (PAPR) designs and working jointly to develop a new design leveraging parts from both companies to meet the surge demand for first responders and health care workers. This new respirator could be produced in a Ford facility by UAW workers.

To go as fast as possible, the Ford and 3M teams have been resourcefully locating off-the-shelf parts like fans from the Ford F-150’s cooled seats for airflow, 3M HEPA air filters to filter airborne contaminants such as droplets that carry virus particles and portable tool battery packs to power these respirators for up to eight hours.

Ford is looking at how it might produce these new-generation PAPRs in one of its Michigan manufacturing facilities, helping 3M boost production potentially tenfold.

“Working with 3M and GE, we have empowered our teams of engineers and designers to be scrappy and creative to quickly help scale up production of this vital equipment,” said Jim Hackett, Ford’s president and CEO. “We’ve been in regular dialogue with federal, state and local officials to understand the areas of greatest needs. We are focusing our efforts to help increase the supply of respirators, face shields and ventilators that can help assist health care workers, first responders, critical workers as well as those who have been infected by the virus.”

“We’re exploring all available opportunities to further expand 3M’s capacity and get healthcare supplies as quickly as possible to where they’re needed most – which includes partnering with other great companies like Ford,” said Mike Roman, 3M chairman of the board and CEO. “It’s crucial that we mobilize all resources to protect lives and defeat this disease, and I’m incredibly grateful to Ford and their employees for this partnership.”

Ventilators

In addition, Ford and GE Healthcare are working together to expand production of a simplified version of GE Healthcare’s existing ventilator design to support patients with respiratory failure or difficulty breathing caused by COVID-19. These ventilators could be produced at a Ford manufacturing site in addition to a GE location.

“We are encouraged by how quickly companies from across industries have mobilized to address the growing challenge we collectively face from COVID-19,” said GE Healthcare President and CEO Kieran Murphy. “We are proud to bring our clinical and technical expertise to this collaboration with Ford, working together to serve unprecedented demand for this life-saving technology and urgently support customers as they meet patient needs.”

Work on this initiative ties to a request for help from U.S. government officials.

Respirators And Face Shields

Meanwhile, Ford’s U.S. design team also is quickly creating and starting to test transparent full-face shields for medical workers and first responders. The face shields fully block the face and eyes from accidental contact with liquids and when paired with N95 respirators can be a more effective way to limit potential exposure to coronavirus than N95 respirators alone.

The first 1,000 face shields will be tested this week at Detroit Mercy, Henry Ford Health Systems and Detroit Medical Center Sinai-Grace Hospitals. Roughly 75,000 of these shields are expected to be finished this week and more than 100,000 face shields per week will be produced at Ford subsidiary Troy Design and Manufacturing’s facilities in Plymouth, Michigan.

Ford is leveraging its Advanced Manufacturing Center in Redford, Mich., and in-house 3D printing capabilities to manufacture disposable respirators, which are needed to help filter the air healthcare workers and first responders breathe. Once approved by the proper health agency, Ford will initially start at a pace equal to 1,000 per month but will quickly grow production as fast as possible.

Ford is evaluating a separate effort not involving GE Healthcare with the U.K. government to produce additional ventilators.

In China, Ford of China joint venture partner Jiangling Motors also has donated 10 specially equipped Transit ambulance vans to hospitals in Wuhan, where the coronavirus outbreak began. Ford is also reacquiring 165,000 N95 respirators from China that were originally sent by Ford to China earlier this year to help combat coronavirus.

Ford also has kicked off a working team to help hospitals locate and secure urgently needed surgical and N95 respirators. Ford has so far committed sending Henry Ford Health Systems 40,000 surgical masks while it locates additional supplies.

Additional companies and individuals who are interested in contributing to this effort can submit their information here at www.fordnewideas.com.

Ford, along with the companies it is supporting, will provide additional updates as these special projects progress.

You May Also Like

BendPak Founder Don Henthorn Passes Away

Grew company from small machine shop to global leader in car lifts and garage equipment.

Don Henthorn, owner and founder of BendPak Inc., peacefully passed away at home Thursday, March 28, at the age of 85. Under his leadership, BendPak has grown from a small machine shop to one of the world’s leading manufacturers of car lifts and automotive service equipment.

Management and operations of the privately owned company are unchanged. 

ASE Practice Tests Available Online

You can get a good idea of what to expect by adding the official ASE practice tests to their study plans.

AACF Celebrates 65 Years Serving the Aftermarket

AACF will be announcing more details about this commemorative fundraiser April 1st.

Auto Care Association Launches REPAIR Act Video

The goal is to emphasize the need for federal REPAIR Act legislation, according to the Auto Care Association.

Valvoline Celebrates Female Service Center Employees

Valvoline is launching a social media campaign led by its female experts who are sharing automotive preventive maintenance tips to promote accessible vehicle care for all.

Other Posts

ASE Education Foundation, Goodguys Continue Partnership

Goodguys is one of many industry relationships the foundation has developed to help solve the technician shortage.

BorgWarner Announces Plan to Reduce Supply Chain Emissions

A partnership with Manufacture 2030 will support BorgWarner in reaching its Scope 3 emissions reduction goal.

Mevotech Releases 237 New Chassis, Control Arm, Wheel End Parts

The release boosts coverage for domestic and import passenger vehicles, pickup trucks, SUVs and EVs up to model year 2023.

MEMA Celebrates 120th Anniversary

MEMA said the milestone “underscores the association’s enduring legacy and its pivotal role in advancing the future of mobility and the interests of vehicle suppliers.”