EPA To Propose Eliminating Use Of 134a In Vehicles, Consumer Products

EPA To Propose Eliminating Use Of 134a In Vehicles, Consumer Products

According to the agency, a proposed rule will be issued this summer to withdraw approval for 134a for use in new motor vehicles and as an aerosol in consumer products. EPA pointed to the availability of substitutes for 134a in both motor vehicles and consumer products including 1234yf, which was approved under SNAP for use on vehicles.

From AAIA Capital Report

WASHINGTON, D.C. – The U.S. Environmental Protection Agency (EPA) announced on Tuesday, Feb. 4 that it will soon issue a proposed rule that would eliminate the use of 134a as a refrigerant in new motor vehicles and as an aerosol in many consumer products. The action will be taken under the Significant New Alternatives Program (SNAP), which was established under the 1990 Clean Air Act Amendments to evaluate the human health and environmental impact of substitutes for ozone-depleting substances that have been phased out of production. The agency is taking this action as part of the President Climate Action Plan, which aims to develop an “all-of-the-above” strategy for reducing emissions of greenhouse gases in the U.S.

According to the agency, a proposed rule will be issued this summer to withdraw approval for 134a for use in new motor vehicles and as an aerosol in consumer products. EPA pointed to the availability of substitutes for 134a in both motor vehicles and consumer products including 1234yf, which was approved under SNAP for use on vehicles. EPA did clarify that the upcoming action will not impact the use of 134a in the servicing of motor vehicles already on the road. As part of the announcement, EPA did not specify a timeline for ending use of 134a, but stated that such action would be determined based on each specified use case.

You May Also Like

Standard Motor Products Announces 123 New Numbers

The release provides new coverage in 53 distinct product categories and 47 part numbers for 2023 and 2024 model-year vehicles.

Standard Motor Products, Inc. (SMP) announced the introduction of 123 new part numbers in its March new number announcement. The release provides new coverage in 53 distinct product categories and 47 part numbers for 2023 and 2024 model-year vehicles.

Internal Combustion Engine (ICE) Segment

Standard’s Fuel Injection program has expanded with eight GDI High-Pressure Fuel Pumps and GDI High-Pressure Fuel Pump Kits. Standard’s line of Variable Valve Timing components also grows with this release. VVT Sprockets have been added for Ford vehicles through 2023, and VVT Solenoids are new for General Motors vehicles. Oil Filter Housing Assemblies are new for popular European vehicles, and Oil Coolers have been added for Nissan and Subaru vehicles. Adding to Standard’s extensive Electronic Throttle Body program, new numbers have been introduced for the 2022 Ford Bronco Sport and 2022-20 Ford Escape, the company said.

BendPak Founder Don Henthorn Passes Away

Grew company from small machine shop to global leader in car lifts and garage equipment.

ASE Practice Tests Available Online

You can get a good idea of what to expect by adding the official ASE practice tests to their study plans.

AACF Celebrates 65 Years Serving the Aftermarket

AACF will be announcing more details about this commemorative fundraiser April 1st.

Auto Care Association Launches REPAIR Act Video

The goal is to emphasize the need for federal REPAIR Act legislation, according to the Auto Care Association.

Other Posts

Valvoline Celebrates Female Service Center Employees

Valvoline is launching a social media campaign led by its female experts who are sharing automotive preventive maintenance tips to promote accessible vehicle care for all.

ASE Education Foundation, Goodguys Continue Partnership

Goodguys is one of many industry relationships the foundation has developed to help solve the technician shortage.

BorgWarner Announces Plan to Reduce Supply Chain Emissions

A partnership with Manufacture 2030 will support BorgWarner in reaching its Scope 3 emissions reduction goal.

Mevotech Releases 237 New Chassis, Control Arm, Wheel End Parts

The release boosts coverage for domestic and import passenger vehicles, pickup trucks, SUVs and EVs up to model year 2023.