Collision Blueprinting with Alignment Equipment

Collision Blueprinting with Alignment Equipment (VIDEO)

An alignment is usually called for prior to ADAS calibrations. This video is sponsored by Hunter Engineering.

An alignment is usually called for prior to ADAS calibrations, because if the wheels aren’t going straight, then neither are the cameras or radar.

This means the system won’t work as intended, which can have serious results.

Blueprinting, as Joe Keene explains, helps ensure that all collision damage has been properly repaired and the vehicle is ready for alignment and calibration.

Joe demonstrates in detail how the ADASLink scan tool leads the technician through the pre-scan, including use of extenders for a more comprehensive view and ride height targets to make sure the vehicle is level. As systems change and more thorough documentation is required, Hunter will meet the demands.

The step-by-step onscreen guidance of ADASLink ensures no steps are missed, eliminating guesswork and providing a precise and thoroughly documented calibration for more than 25 million vehicles.

This video is sponsored by Hunter Engineering

You May Also Like

Limited Slip Supplement (VIDEO)

If the frictional properties are not correct, chatter will occur. Sponsored by Lubegard.

Welcome to the Lubegard Limited Slip Supplement overview. Clutch-based limited slip differentials are common on many automotive applications like trucks and SUVs, but they present a unique problem. These differentials often use different clutch configurations, either cone or flat type, made with various materials and frictional requirements. When both wheels have ample traction, the clutch plates bind together tightly, sending consistent power to each wheel. When one wheel slips, additional power is sent to the other wheel based on the frictional properties of the clutch packs. This is where the gear lubricants frictional properties play an important role in functionality and performance.

Rust and Corrosion Preventive Oil (VIDEO)

Your tools and equipment need to be protected from rust. This video is sponsored by Lubegard.

Auto Pros Team Visits Hybrid Shop of The Carolinas

Auto Pros on the Road puts the Babcox team into shops across the USA. This episode is sponsored by Autolite.

Nissan Around View ADAS Camera Calibration (VIDEO)

Always calibrate the around view monitor system after a collision.This video is sponsored by Hunter Engineering.

ADAS Calibrations: Accessing the FCA/Stellantis Secure gateway

The secure gateway ensures no procedures are performed without the proper data. Sponsored by Hunter Engineering.

Other Posts

Ford F-250 Shock Replacement (VIDEO)

Follow along the step by step installation process of shocks on a Ford F-250. This video is sponsored by PRT.

2007-2021 Toyota Tundra Strut Replacement (VIDEO)

Follow along the step by step installation process for struts on 2007-2021 Toyota Tundra’s. This video is sponsored by PRT.

AMN Drivetime: MEMA Leaders Chat About The Future

MEMA leaders sat down with Bill Babcox to share a few updates on the realignment of the association announced in November.

Not All Diesel Particulate Filters Are The Same

Diesel Particulate Filters (DPFs) can vary greatly. Sponsored by AP Emissions.