Video Archives - Page 54 of 67 - Brake & Front End

More Video Series

VIDEO: Pinch, Push, Pump – How To Properly Push Back The Caliper Piston

In this video, Andrew Markel discusses how to push the caliper piston back into the bore without damaging the brake hose and possibly the ABS modulator. Using the proper method and technique can ensure that the dirtiest brake fluid is removed from the hydraulic system. Sponsored by Auto Value and Bumper to Bumper.

VIDEO: What Happens When Shocks And Struts Lose Their Oil And Gas

What wears out on a shock or strut is the fluid and gas inside and the seals that keep the ingredients inside. Andrew Markel explores how the fluid and gas can escape and what happens to the stability of the vehicle. Sponsored by Auto Value and Bumper to Bumper.

VIDEO: Brake Bleeder Screw Removal Methods And Strategies

In this video, Andrew Markel discusses six tips to make dealing with bleeder screws more productive and profitable. Sponsored by Auto Value and Bumper to Bumper.

VIDEO: Drive Axle Inspection, Diagnostics And Installation

CV and tripod joints hardly ever fail on their own. The failure of the joint or axle can be caused by a faulty mount, suspension or steering component. Sponsored by Auto Value and Bumper to Bumper.

VIDEO: What Does A Three-Way Catalytic Converter Reduce?

If a three-way catalytic converter is functioning properly, only nitrogen, carbon dioxide and water should be coming from the tail pipe. Sponsored by Auto Value and Bumper to Bumper.

VIDEO: Diagnosing Drivetrain Stabilization

The angles of the universal and cardan joints on a driveshaft have a limited range of motion. If the angle of the pinion, transmission or axle exceed the specifications, it can result in noise and damage to the drivetrain. Andrew Markel shows how a worn motor mount or damaged axle can result in a customer noise compliant. Sponsored by TrakMotive.

VIDEO: Build Customer Relationships Using Shop Software

Doing the little things now to make your customers happy will solidify your relationship and keep them coming back to your shop time and time again. Sponsored by Manager SE from Mitchell1.

VIDEO: Lab Tests Show Brake Hardware Effectiveness On Pad Wear

Andrew Markel discusses a lab test with three vehicles on the effectiveness of brand new brake hardware on preventing premature brake pad wear. Sponsored by Carlson.

VIDEO: Comparing The Condition Of Opposing Wheel Bearings

Andrew Markel discusses diagnosing wheel bearings, and how the condition of one bearing may give a hint of the condition of the bearing on the opposite side. Sponsored by FAG, a Schaeffler brand.

VIDEO: Checking Transmission Clutch Health

Andrew Markel discusses several ways to diagnose a clutch’s healthy operation to maximize the life of the transmission. Sponsored by Valeo.

VIDEO: Heat Treated Wheel Bearing Parts

Andrew Markel discusses wheel bearing production and how heat treating makes its surfaces stronger. Sponsored by FAG, a Schaeffler brand.

VIDEO: False Wheel Speed Reading Caused By Metal Debris

Andrew Markel discusses active wheel speed sensors, and how metal debris sticking to the reluctor ring can cause a code or false activation. Sponsored by FAG, a Schaeffler brand.