Brake Pad Copper Update

Brake Pad Copper Update

Like it or not, recent mandates limiting the concentration of copper allowed in brake pads could be our generation's asbestos crisis. We are just at the start of what could be a painful, but necessary, process that will impact your shop and the environment in a positive way – even if you do not live on the West Coast.

Like it or not, recent mandates limiting the concentration of copper allowed in brake pads could be our generation’s asbestos crisis. We are just at the start of what could be a painful, but necessary, process that will impact your shop and the environment in a positive way – even if you do not live on the West Coast.

Here are 5 things you need to know about impending brake pad regulation:

1. Two states set the standard

Spurred by copper-reduction laws enacted by California and Washington in recent years, several other states had originally drafted legislation aimed at reducing brake pad pollution. However, the EPA’s Copper-Free Brake Initiative, in tandem with California and Washington’s existing laws, effectively made other state-specific laws unnecessary since these regulations set an unwritten nationwide mandate for compliance for all parts manufacturers.

2. The new laws target the “installer”

Along with manufacturing and distribution, the California and Washington state regulations target the “installer” (not the most flattering term) in the law’s language. This means a shop in these states could be fined $10,000 fine per violation if a non-approved brake pad is installed. These fines do not kick in until 2025.

3. The laws target other substances

While copper has gotten most of the attention, these new laws target pads with other dangerous materials, such as asbestos, chromium and other heavy metals.

4. These laws are being phased in NOW

While these laws will not be in full effect for several more years, many components of the laws are being phased in already. As of Jan. 1, 2013, friction material manufacturers who do business in Washington state were required to submit a report on their use of copper, nickel, zinc, antimony and other metals. In 2015, all new inventory was required to be labeled stating if it complied with the law. Manufacturers, distributors and “installers” have until 2025 to sell existing inventory.

5. It might impact your choices

These laws put new financial and technical burdens on friction material manufacturers. Under the Washington law, friction formulation has to be tested and approved by a laboratory and the applications using this material must be submitted so the right label can appear on the box. Every step in the process costs money and time. These burdens may be so great that some manufacturers could get out of these markets completely.

You May Also Like

Brake Problems

Reducing brake drag on late-model vehicles is not accomplished by a single component; it takes a system.

Drivers and technicians rarely make the connection between fuel economy and brakes. Moving the pads back from the rotor by only 1mm can increase fuel economy by as much as three to five percent. For engineers, it is a huge gain that does not involve exotic materials or adding expensive components.

The Real Cost of Installing Cheap Brake Pads

The brake repair market is starting to become dominated by a “good enough” mentality.

Brake Boosters and Start/Stop Vehicles

For a vacuum brake booster to work, it needs a source of vacuum.

Wheel Speed Sensor and Hub Unit Diagnostics

All wheel speed sensor codes are just the starting points of a diagnosis and not a reason to order a part.

Better Brake Law Update

Learn the latest about the salmon-inspired law.

Other Posts

Ceramic vs. Semi-Metallic Brake Pads: How They Work and What They’re Made Of

Your customers rely on their vehicles to get them safely from point A to point B, and they also rely on their brake pads and brake rotors to provide reliable stops each and every time. So how does the vehicle’s friction system work and what role do disc brake pads play? Once you understand how

Identifying Brake Issues With Brake Dust

Brake dust can indicate what could be wrong. This video is sponsored by Auto Value and Bumper to Bumper.

Axle Torque Procedures

Guessing the correct torque setting is a bad idea.

Top 10 Brake Mistakes

Here are the top 10 brake mistakes technicians can make.