Bendix Celebrates 9M Bendix Remanufactured Brake Shoes

Bendix Celebrates 9M Bendix Remanufactured Brake Shoes

As demand for reman shoes grows and safety technology advances, wheel-end performance matters even more, says Bendix.

As 2020 winds down, Bendix this week is celebrating the fact that it has produced more than 9 million remanufactured brake shoes, creating positive impact made both on and off the road. 

“Since we began serial production of reman brake shoes in the fall of 2012 – combining Bendix’s 40+ years’ experience in remanufacturing with our brake manufacturing leadership – the demand has been continuous and growing,” said Mark Holley, director of marketing and customer solutions, Wheel-End. “And from the outset, it’s been propelled by the desire to maintain OE-level quality and performance while realizing the bottom-line benefits of remanufactured shoes.”

Bendix Commercial Vehicle Systems LLC handles the complete salvage, coining, and assembly processes that make up start-to-finish brake shoe remanufacturing at its Huntington, Indiana, facility. Bendix’s remanufacturing efforts go back more than four decades and include air compressors, air disc brake calipers, and electronic control system components.

Back to a New Beginning

“Bendix coins 100% of its brake shoes to return them to OE geometry, so they will perform as designed by OE engineers,” Holley explained. “That’s what sets the process apart from brake shoe reliners: They’re simply applying new friction to shoes that have experienced serious force and temperature changes as part of their normal service life. Without correcting the deformities caused by regular use, a relined but uncoined reman shoe may not make full drum contact or sit in the S-cam properly, resulting in reduced brake performance and uneven wear. Uncoined reman shoes may even pose problems with reinstallation of the drum and be more likely to experience rust jacking leading to cracked friction – and higher risk of CSA violations.”

The Bendix Remanufactured Shoe Center in Huntington uses a 1,000-ton coining press that applies the full tonnage needed to return a shoe to its proper shape and OE specifications. The shoe center opened in 2012 and was significantly expanded in 2014 to more than 74,000 square feet.

The next step in the Bendix quality process is the application of high-quality coatings. When a coined shoe is paired with a premium coating and high flexural strength friction, it provides superior protection against rust jacking, reducing the risk of cracked friction. Bendix reman shoes with OE friction are E-coated (electro deposition), and shoes equipped with Bendix Advanced or Basic friction feature Bendix PermaGuard coating. Finally, the assembly process uses the same riveting procedure employed for new Bendix OE shoes – ensuring correct lining attachment for maximum lining service. Every step of the process is engineered to deliver safety, performance, and full-service life.

Reman and Sustainability

Bendix’s commitment to remanufacturing earned the company status as one of the first ambassador companies of the Manufactured Again Certification program from MERA – The Association for Sustainable Manufacturing. In this role, Bendix continues its efforts to educate buyers about remanufacturing, suppliers, and performance expectations. The Manufactured Again Certification program helps purchasers easily identify remanufactured goods with like-new quality and warranty coverage. The program also promotes environmental stewardship and remanufacturing as a leading example in the circular economy. 

The Manufactured Again Certification program launched in November 2016 and is based on the internationally recognized quality management standards ISO 9001 and IATF 16949. Where ISO 9001 can be used by any organization, large or small, in any industry, the supplemental IATF 16949 is one of the automotive industry’s most widely used international quality standards. To receive Manufactured Again Certification, remanufacturers are required to submit third-party evidence of conformance to the accepted quality standards. The Manufactured Again Verification Committee oversees the program and reviews all applications.

By extending the lifetime of previously produced components (brake shoes can be recoined a number of times), remanufacturing creates value and contributes to the circular economy, while also cutting down on the use of new metal materials and the carbon dioxide impact of producing them. This aligns with Bendix’s commitment to the United Nations’ Sustainable Development Goal 12 (SDG 12) – Responsible Consumption and Production.  

You May Also Like

MEMA Celebrates 120th Anniversary

MEMA said the milestone “underscores the association’s enduring legacy and its pivotal role in advancing the future of mobility and the interests of vehicle suppliers.”

MEMA, The Vehicle Suppliers Association, announced its 120th anniversary, a milestone it said "underscores the association's enduring legacy and its pivotal role in advancing the future of mobility and the interests of vehicle suppliers."

MEMA was founded on March 2, 1904, in Cleveland, Ohio, to represent the burgeoning automotive parts manufacturing industry. For the last 120 years, MEMA and its members have been at the forefront of advocacy, innovation and collaboration, the association said.

UniClutch Launches Clutch System in the United States

From Australian manufacturer Clutch Industries, UniClutch is a clutch system that delivers uncompromised performance.

MEMA Aftermarket Suppliers Becomes UAF Gold Lifetime Trustee

The partnership with UAF is a commitment to the future of the automotive aftermarket, MEMA Aftermarket Suppliers said.

Castrol Turns 125, Debuts New Market Strategy

As part of the new strategy, Castrol will explore opportunities in battery thermal management, digital and service solutions and data center immersion cooling.

FCS Introduces 18 New Numbers in February

The new release includes 4 shock absorbers and 14 suspension struts.

Other Posts

Philips Releases GoPure Advanced Automotive Air Purifier

It filters out 99% of bacteria and respiratory viruses and fits in the cupholder.

AP Emissions Releases New Part Numbers for February

The 12 new SKUs cover 6 million VIO.

MANN+HUMMEL NA Aftermarket Shows Right to Repair Support

Representatives from MANN+HUMMEL’s North American aftermarket brands recently visited Capitol Hill to express their support for H.R. 906.

Federated Upgrades Car Care Center Program

The enhanced program features updated signage, marketing support, image-enhancing tools, wearables, business management assistance and other information to help with day-to-day shop operations.