AMSOIL Offers Synthetic Power Steering Fluid For Import Vehicles

AMSOIL Offers Synthetic Power Steering Fluid For Import Vehicles

Formulated with a high viscosity index, AMSOIL Synthetic Power Steering Fluid resists heat for long fluid life. It helps seals remain soft to prevent leaks, while helping components remain clean and last longer. Power steering components and hoses receive maximum protection against wear and stress for extended equipment life.

AMSOIL Multi-Vehicle Synthetic Power Steering Fluid has been reformulated to meet the growing demands of newer vehicles. The upgraded formula provides better wear protection and improved cold weather performance and meets more OEM specifications.

The redesigned synthetic chemistry delivers excellent lubricity and friction-reduction properties. Its low pour point ensures immediate lubrication at startup and in cold temperatures, yet it resists thermal breakdown in high temperatures, says the company.

Formulated with a high viscosity index, AMSOIL Synthetic Power Steering Fluid resists heat for long fluid life. It helps seals remain soft to prevent leaks, while helping components remain clean and last longer. Power steering components and hoses receive maximum protection against wear and stress for extended equipment life.

AMSOIL Multi-Vehicle Synthetic Power Steering Fluid is recommended for power steering systems requiring any of the following specifications.  Follow OEM’s service recommendations to ensure optimum performance.

•   American Motor Corporation C 4124

•   BMW 82 11 0 148 132, 83 29 0 429 576, 81 22 1 468 879, & 82 11 1 468 041

•   Chrysler MS-1872, MS-5931, MS-9602, MS-11655

•   Ford M2C138-CJ, ESW-M2C128-C&D, M2C195-A, M2C204-A, & M2C33-F

•   GM/Saginaw  PSF 9985010, 9985835, & 89021184

•   Hyundai/Kia  PSF-3, PSF-4, & PSF 00232-19017

•   Mercedes Benz  236.3, 345.0, 001 989 24 03 10, 001 989 24 03 12, & Q 1 32 0001

•   Mitsubishi Diamond SP III & PS Fluid

•   Navistar TMS 6810

•   Nissan PSF-II

•   Porsche 000 043 206 56

•   Saab 93160548, (45) 30 09 800, & 30 32 380

•   Subaru  K0209A0080

•   Toyota  PSF Type EH, P/N 008886-01

•   Volvo 1161529 & 30741424

•   VW/Audi  TL-52146, G002000, G 004 000 M2, G 004 000 M7, & G 004 000 M8

For more information about AMSOIL synthetic motor oils and performance products, contact your nearest AMSOIL distributor or call AMSOIL at (715) 392-7101 or 1-800-777-8491.  AMSOIL INC., 925 Tower Avenue, Superior, WI 54880, or go to www.amsoil.com.

You May Also Like

Ride Height Sensors

If one of these sensors is replaced, it must be calibrated after it is installed.

Ride-height sensors not only measure the position of the suspension, but also the rate of movement. They are supplied with a voltage of around 5 volts. The signal voltage is changed as a magnet moves past a coil. Most sensors have three wires — ground, power and signal.

Internally, it is difficult to damage one of these sensors. Externally, the linkage that connects the sensor to the suspension arm can also be damaged. The connector can be damaged and cause a short or open and a code will be set. If one of these sensors is replaced, it must be calibrated after it is installed.

Ball Joint Wear

As the wear increases, play increases inside the joint. 

Curing Shock, Strut and Suspension Noise

As vehicles age, eliminating noise is Job 1. But ‘noise’ may mean different things to you and your customers.

Pricing Alignments

Why ordering off the menu can hurt your shop and customers.

Toe Angles and Ride Height 

Zero toe angle is present when both tires are parallel to the center thrustline.

Other Posts

Wheel Bearing Analysis

What creates endplay? What creates noise?

We Want Your Thoughts On Electronic Power Steering

Your opinion matters us and can be profitable for you too! Share your ideas with us.

MEYLE Expands Electronics, Sensor Product Portfolio

The focus is on assistance systems and engine and transmission management, with more than 300 new part numbers.

FCS Introduces 42 New Numbers in May

Complete strut assemblies, shock absorbers, shock absorber assembly kits and suspension struts for popular VIO applications are included.