Advice from the Bendix Answerman: Brake Fluid Service as Important as Oil Changes

Advice from the Bendix Answerman: Brake Fluid Service as Important as Oil Changes

While some may think an old school "flush" will breathe new life into a braking system, Chuck Kennedy, technical trainer at Bendix Brakes says if one is performed without checking for contaminants already present, the braking system's hydraulic control unit (HCU) can be seriously damaged. That's why maintaining clean, contaminant-free brake fluid is just as important to a vehicle as getting regular oil changes.

While some may think an old school “flush” will breathe new life into a braking system, Chuck Kennedy, technical trainer at Bendix Brakes says if one is performed without checking for contaminants already present, the braking system’s hydraulic control unit (HCU) can be seriously damaged.  That’s why maintaining clean, contaminant-free brake fluid is just as important to a vehicle as getting regular oil changes.       

 “Contaminated brake fluid is one of the top reasons for hydraulic control unit failure in today’s brake systems. It’s critical to remove old fluid from the reservoir and clean the reservoir itself before adding fresh fluid. This keeps contamination from spreading to sensitive areas,” Kennedy said. “A flush takes what’s already in the master cylinder reservoir – including any sediment or solid particulates – and pushes it through the hydraulic control unit before going out of the calipers and wheel cylinders. Inlet solenoid screens will trap particles that haven’t been removed, and if a wheel circuit is plugged, it will usually need to be replaced.”      

As technicians know, it’s expensive to replace hydraulic brake components, and repairs can be easily avoided by just making a quick visual check for sediment and solid deposits.

Technicians may also want to consider using test strips and electronic moisture testers.  If test strips are used, they should be kept tightly sealed to maintain accuracy.  Electronic testers are more expensive, but also more accurate.  

Once particles and other contaminants have been removed, fresh fluid can be bled through the rest of the system, or a full brake fluid change can be performed.  

Kennedy advises that an HCU bleed function performed during a fluid change with a bi-directional scan tool will also insure that all fluid is changed, not just what’s in the main wheel circuit galleys.     

Preventative maintenance goes a long way in keeping today’s complex braking systems fully operational, says Kennedy.  

For more maintenance tips and information, visit www.bendixbrakes.com.

You May Also Like

Adjusting Parking Brakes

You should never estimate when it comes to parking brake adjustments.

The parking or emergency brake has to perform two distinct jobs. First, it must be able to hold the vehicle on an incline. Second, it must be able to stop a vehicle under a specific distance if the hydraulic brakes have failed. These standards are set by the Department of Transportation (DOT), and the kicker is these standards must be met with the force applied by a little old lady. But, over time, the cables can stretch and the friction materials change their length and thickness, which is why adjustments to the system are required.

Charging More for Brake Jobs

Here’s why charging more for brake jobs keeps customers coming back.

Servicing Multi-Piston Brake Calipers

Caliper replacement may be necessary in high-mileage vehicles because of fluid leaks or because the calipers are sticking.

Wheel Bearings

Higher quality wheel bearings use higher quality steel that is properly heat treated.

EV Brake Jobs

With these vehicles, the major aggravation for shops is brake noise and uneven brake pad wear.

Other Posts

Brake Fluid 101: What Does Brake Fluid Do? What is the Difference Between DOT 3 vs. DOT 4?

When you think about the braking system of a vehicle, you probably think about the major parts you see when removing the wheel: brake pads, rotors, calipers and maybe hydraulics. However, one of the most important parts of the system isn’t visible: brake fluid. Brake fluid comes in several formulations for different applications and plays

Brake Pad Diagnostics

Worn brake pads can tell you a lot about the entire brake system and keep new components from suffering the same fate.

Understanding Passive Wheel Speed Sensor Operation

Passive types of wheel speed sensors are still used in many applications so understanding their operation is important.

Gen 1 Wheel Bearings

Removing and installing these bearings requires the correct tools and patience.