2014 LuK Diagnostic Guide Offers Practical Tips And Diagnostic Information

2014 LuK Diagnostic Guide Offers Practical Tips And Diagnostic Information

Schaeffler Group USA Inc. announces the release of the expanded 2014 LuK Diagnostic Guide. LuK's complete guide to clutch operation and failure diagnosis, the Diagnostic Guide has been a leading industry reference tool for clutch repairs over the past 10 years, said the company. LuK has built upon their strategy for continuous improvement with the latest edition of the diagnostic guide featuring updated and expanded technical and diagnostic materials

Schaeffler Group USA Inc. announces the release of the expanded 2014 LuK Diagnostic Guide. 

 

LuK’s complete guide to clutch operation and failure diagnosis, the Diagnostic Guide has been a leading industry reference tool for clutch repairs over the past 10 years, said the company. LuK has built upon their strategy for continuous improvement with the latest edition of the diagnostic guide featuring updated and expanded technical and diagnostic materials, including: 

• Diagnostics of the top causes of clutch failure

• Detailed teardown and installation procedures

• Clutch function and components

• Installation and technical tips

• Detailed failure and diagnostic illustrations 

Tony Williams, Product Manager – Drivetrain for the Schaeffler Group USA,  said of the 2014 diagnostic guide, “We view the diagnostic guide as one of the most important tools in our technical portfolio. The guide provides practical and fundamental information needed to do the job right the first time, thereby reducing unnecessary returns and bay-time.”

Staffed by ASE-certified technicians, LuK’s technical hotline is continually monitored to identify helpful information for inclusion in technical publications and increased customer satisfaction.

Contact your LuK distributor for a copy of the 2014 LuK Diagnostic Guide or send a request to [email protected].

Visit www.Schaeffler-Aftermarket.us to receive the most up-to-date catalog updates and product information including diagnostic and installation tips.

You May Also Like

Power Steering Pull

Every driver has a different threshold for a pull.

How well a vehicle stays in a lane is the result of a complex equation involving the suspension, steering and tires on all four corners. The customer’s definition of a lead/pull condition is explained by the wheel not being straight when traveling in a straight line. An engineer’s definition of a lead/pull condition is the chassis and tire conditions that require steering input to achieve travel in the desired direction. For a technician, it’s about capturing what the driver is experiencing and diagnosing if the condition meets the mechanical criteria for the complaint. When looking to cure the problem, it could be an issue with stacked tolerances of different components and systems. 

DeWalt Launches Line of Residential Level 2 EV Chargers

The line includes portable chargers and wall-mounted units, along with a variety of adapters and mounting brackets.

Axle Torque Procedures

Guessing the correct torque setting is a bad idea.

Autel’s TS900 TPMS Tool

Beyond TPMS, the Autel TS900 shines as a full-service and maintenance tool. Sponsored by Autel.

Mazda Front Radar Calibration

Joe Keene discusses how to calibrate the front radar on a Mazda — the key to which is precisely establishing the centerline.

Other Posts

SAE Selects MAHLE for EV Charging Standard

MAHLE’s system employs a magnetic field to connect the EV to a controlled charging point as it approaches.

Steering Angle Sensor Operations

It is important for the ABS/ESC module to receive two signals to verify the steering wheel’s position.

Tech Tips for Dorman’s OE FIX Steering Tie Rod End Assembly

Read the tech note for tips on installation of this unique fix.

Sustainable Packaging

Changes such as how a product is packaged can add significant reductions in CO2 emissions. Sponsored by Continental.