TPMS Service Kits: Key To TPMS Maintenance

TPMS Service Kits: Key To TPMS Maintenance

Anytime a tire is removed from the rim of a vehicle, a new TPMS kit must be installed. The existing sensor kit could be brand new or years old, but every tire removal should include the replacement of TPMS sensor kit.


While sensor kits may seem so tiny and insignificant, not replacing the kits could cause big problems with tire pressure and vehicle TPMS if not properly serviced.

Due to the variety of vehicles that can come into a shop on a regular basis, shops should stock their bays with different TPMS service kits. There are services and providers that can make an inventory of TPMS service kits easier for a repair facility. Not having the right kit on hand can leave a car stuck in a bay that could be used for other service jobs.

Clamp-on kits are made up of a nut, valve core, grommets, and a valve cap. Each piece has a specific function and lifespan. Meanwhile, snap-in sensors look like regular rubber valve stems and include a valve cap.

There are several reasons you should never reuse parts or sensor kits when servicing TPMS. It’s critical to never reuse a valve stem. Valve stems are subjected to heat from both the brakes and road and can degrade over time. Always use the valve core included in the kit.  Replacing the valve stem core will prevent future leaks. 


A TPMS valve core is nickel-plated and prevents galvanic corrosion and ensures the integrity of the main seal. To help prevent corrosion, never use a brass valve core with an aluminum TPMS sensor. Instead, use a nickel-plated valve core with an aluminum TPMS sensor. If the wrong valve core is used, accelerated corrosion could result in the core becoming stuck in the stem and unable to be removed.

If a nut is reused, the anodized aluminum surface (which prevents against galvanic corrosion and material deterioration) could be scratched away. This could cause corrosion between the sensor, wheel, and stem making the nut impossible to torque to the correct specifications or remove due to corrosion on the threads.


Reusing seals and grommets can also cause problems. On the sensor, the two grommets help seal the nut to the wheel. As soon as the nut is torqued the grommets conform to the shape of the wheel. This is the previous shaping can’t be fixed and reusing these pieces may cause a slow leak.

Installing Kits

When removing a tire from the wheel, it’s important to locate the TPMS sensor and be careful not to damage it. Damaging the sensor will cost the shop its profits to replace the sensor it mistakenly broke.

When it comes time to install a new TPMS sensor kit, it is important to follow instructions or the manufacturer’s recommendation.

When installing snap-in valves there can be two different installation methods depending on the valve stem being installed. The first installation method involves installing the valve stem in the rim and then attaching the sensor. The second method is to first attach the sensor to the valve stem then insert it into the wheel.

The reason for the two installation methods is due to the sensors contact with the wheel. Some sensors could come into contact the wheel as the stem is pulled.

Remember to always use a preset torque screwdriver with the correct torx head, when attaching a new valve sensor to the sensor body. Many tool suppliers package two preset torque drivers in a set.

Be mindful of the stress on the sensor and its alignment when tightening the screw. Slowing screw in the treads to make sure the sensor and stem are aligned. And stop when the tool clicks indicating the proper torque has been reached.

When tightening the screw make sure you don’t over tighten the nut. Sealing grommets are engineered to work at a specific torque and over tightening them can lead to a leak. This is why torque specifications are measured in inch-pounds and not foot-pounds. Hallow stems can only take so much pressure before they break. 

You May Also Like

The Winter Tire Opportunity – Now Is The Time

Winters tires aren’t just a luxury, it’s your job to tell your customers the positive impact that the tires can give them.

It was a frigid February morning in Chicago last year. The kind of cold that creeps into the depths of your lungs, making it difficult and even a little painful to breathe. The kind of cold that literally takes your breath away. The snow was falling as I stepped into my car and took off across The Chicago Skyway with the city lights in my rear view. It was around Gary, Indiana, that the lake effect snow engulfed Interstate 90 and made it impossible to see the road more than about 15 feet ahead as I made an unwise attempt to pass a massive snowplow in the right lane. And, it was this moment that I understood the difference between an all-season tire and a true winter tire. My life as a “tire guy” would never be the same again.

Diagnosing Audi A8 TPMS Issues

These are all the steps you’ll need to pinpoint fault issues in TPMS for 2009-2016 Audi A8 vehicles.

The Rule of 3X Tire Rotation

Proper rotation procedures maximize tread life and customers coming back.

Communicating The Effectiveness Of TPMS

A good angle to start with may be laying out the consequences of not having a working TPMS.

Servicing Tires With 18-In.-Plus Rims

Servicing any tire and wheel assembly correctly starts with having the right equipment.

Other Posts

TPMS Tools and Sensors

Transform TPMS with advanced diagnostics and sensor programming. This video is sponsored by Bosch.

Autel’s TS900 TPMS Tool

The Autel TS900 shines as a full-service and maintenance tool. Sponsored by Autel.

Turning Off The TPMS Light

If a vehicle comes into your shop with the TPMS light on, there are a few key things to check first for time’s sake.

TPMS Sensor Signals

TPMS sensor signals are low power and low frequency, with most sensors transmitting at 315MHz or 433MHz.