Inspection Archives - Brake & Front End
Solid Axle Bearing Restoration

A solid axle might seem like antiquated technology. However, many vehicles still utilize solid or live axles because of their load-carrying capabilities. An axle is not a sealed unit. Inside are bearings, seals and fluids that must be serviced. Also, replacement parts are available from BCA. It’s not uncommon for a solid rear axle vehicle

For Better Customer Relations, Be A Better Listener

For a service advisor, asking questions and letting the customer explain can be a great diagnostic tool.

Reprogramming Transmission Control Modules

It’s understandable to have a lot of questions and fears about reprogramming. 

Inspection Intervals

If you fail to inspect an item on the schedule, you could miss out on maintenance opportunities.

Ball Joint Inspection

It’s important to remember not to miss a worn joint. If a ball joint fails, the driver loses control of the vehicle.

Mazda IActivsense ADAS Systems

Mazda’s ADAS technologies use radar, cameras and lasers to identify objects and hazards and help drivers be safer.

Steering Angle Sensor Troubleshooting

If the calibration process can’t be completed, it will set a code for the steering angle sensor.

Power Steering Hose Replacement and Problems

It is important to understand the types of power steering hoses before replacement.

ALI Introduces Check360 Certified Lift Inspection

ALI’s lift inspection process meets all the requirements of the national safety standard governing lift inspection.

VIDEO: Wheel Bearing Inspection From Pothole Damage

When a bearing hits a pothole, it actually causes a small indentation to one of the races. This video is sponsored by GMB.

Brake Fluid Service

Visual inspection of the fluid can be extremely misleading.

VIDEO: Brake Rotor Safety Inspection

If there is any cracking, it can result in a structural failure of the rotor. This video is sponsored by ADVICS.