You searched for ABS - Page 2 of 227 - Brake & Front End
Carlson Releases New ABS Wheel Speed Sensors

The company says the new wheel speed sensors undergo thermal, shock, vibration, durability and extreme temperature testing.

Meyle Releases ABS Sensor Kit for Targeted Replacement

If an ABS sensor had been damaged by a defective sensor ring, it would have been necessary to replace the entire wheel hub.

ABS/ESC False Activation Diagnostics

False activation incidents involve the ABS modulator taking over braking or intervening to restore vehicle stability.

VIDEO: Can Today’s Shop Operator Be An Absentee Owner?

Advice for owners faced with challenges of being an absentee owner. This video is sponsored by the MyPlace4Parts Studio.

Brake Service: Bleeding And Flushing ABS Systems

Replacing a vehicle’s brake fluid requires more tools and skills than a glass bottle and clear tubing.

VIDEO: CV Joint Axles And ABS Wheel Speed Sensors

Follow these essential steps before this auto repair. This video is sponsored by GSP North America.

Understanding ABS Module Logic

ABS is the foundation of the ESC system. The ABS modulator also performs electronic brake distribution (EBD).

Ford Tech Tip: ABS/TCS Lamp Flashing And Multiple Diagnostic Trouble Codes Present

Some 2009-2012 F-150 and 2010-2012 F-150 Raptor vehicles built on or before 6/10/2012 may exhibit a condition in which the traction control indicator is flashing or illuminated with diagnostic trouble codes (DTCs) C1278, C1280, C1282 and/or C1963 stored in the anti-lock brake system (ABS) module.

Understanding ABS Modulator Problems

Mechanical issues with the ABS modulator or hydraulic control units (HCU), are rare, but they can happen. With more vehicles on the roads having older ABS systems that have not seen proper brake fluid maintenance, mechanical issues are becoming more common.

ALPHA MUTT With ABS From IPA Integrates All Aspects Of Trailer Inspection

A technician now can control and test all lighting, ABS and air-brake circuits with the provided tablet while conducting a walk-around PMI or DOT inspection, according to IPA.