GM Power Steering Noise/Leaks

GM Power Steering Noise/Leaks

Some customers may comment that their vehicle is experiencing a power steering noise/whine or fluid leak from the power steering pump, gear or high-pressure power steering hose during extremely low outdoor temperature operation.

GM: Power Steering Noise/Leaks from Power Steering Pump, Gear or High Pressure Hose During Extreme Low Temperature Conditions

MODELS:

-2009-2015 Buick LaCrosse (Equipped with Hydraulic Power Steering)

-2010-2013 Buick Regal

-2012-2015 Buick Enclave

-2013-2015 Buick Encore (Equipped with RPO N40 Hydraulic Power Steering)

-2007-2014 Cadillac Escalade

-2009-2015 Cadillac SRX

-2013-2015 Cadillac XTS

-2007-2014 Chevrolet Avalanche, Silverado 1500, Suburban 1500, and Tahoe (Equipped with Hydraulic Power Steering)

-2010-2015 Chevrolet Equinox (V6 Only)

-2011-2015 Chevrolet Silverado 2500/3500

-2012-2015 Chevrolet Traverse

-2013 Chevrolet Caprice PPV

-2007-2014 GMC Sierra 1500, Yukon Models (1500 Series Only)

-2010-2015 GMC Terrain (V6 Only)

-2011-2015 GMC Sierra 2500/3500

-2012-2015 GMC Acadia

CONDITION: The information contained in this bulletin applies only to the models listed. DEXRON HP fluid cannot be used in any other GM product’s power steering system. Some customers may comment that their vehicle is experiencing a power steering noise/whine or fluid leak from the power steering pump, gear or high-pressure power steering hose during extremely low outdoor temperature operation. This bulletin replaces Bulletin Number 12-02-32-002, as DEXRON HP fluid has improved cold temperature characteristics over the former cold temperature fluid.

CAUSE: During extremely low temperatures, -35°C (-31°F) or lower (usually in the -40°C/F or less range), the power steering fluid may thicken and the power steering system pressures may rise, causing damage to various components.

SOLUTION: To resolve this condition, replace any damaged power steering system components. Refer to power steering service information for diagnosing and repairing steering system component fluid leaks. After the leaks are fixed, flush the power steering system and refill with DEXRON HP fluid.

Courtesy of ALLDATA.

You May Also Like

Chassis Parts and Alignment Angles

Knowing why the adjustment is required is critical to performing the total alignment.

An alignment angle doesn’t change randomly. There is a cause-and-effect relationship between external and internal forces that can alter the geometry of a vehicle’s suspension. Having the alignment reading for only one angle on one corner is just like knowing the temperature without knowing if there is a tornado outside.

Suspension Upgrades – Selling Shocks and Struts

The question customers fail to ask is, what is “best” for their vehicle?

Air Ride Suspension Diagnostics

The key to understanding the logic of air ride systems is using service information.

Steering Angle Sensor Operations

It is important for the ABS/ESC module to receive two signals to verify the steering wheel’s position.

Chassis Alignment

The source of the complaint can be the angles, electronics or tires.

Other Posts

Hydraulic Power Steering Service Opportunities

Hydraulic power steering is still the choice for some platforms and applications.

Power Steering Pull

Every driver has a different threshold for a pull.

Laying Out Your Shop for ADAS/EV Repairs

With so many vehicles equipped with some form of ADAS, rethinking your electronics layout or plan might be in order.

Broken Springs

What is the cause for the failure? Why does it occur with specific vehicles?